1963 Pace Setter Steering Wheel

[FWD Look Fan]

This is a tough one. I'm looking for a square/oval steering wheel with horn rim compatible with my 1963 Pace Setter.
This is all I have found after a lot of searching -- (picture attached). It's the wrong color but the right shape, but I can live with that.
I've had no response from the poster as this sales offer is years old.
Any leads, help, contacts, rumors, etc. appreciated.
Thanks, folks,
Chris

 

[SpaceWagon]

To the best of my knowledge that style / shape steering wheel was the standard offering on all 1963-64 Chryslers.

Attached is a picture from the 1963 Chrysler brochure showing the steering wheel.

Should be able to locate one. Though if it has to be a specific color or emblem on horn ring for the pacesetter convertibles than that maybe more difficult or require painting.

 

[SGT FURY]

I have a red one from a 63 imperial.

 

[GregG48203]

I believe the round wheel was standard on Newports; the oval wheel would have been optional on Chryslers. The Imperial wheel is different.

 

[FWD Look Fan]

I have a red one from a 63 imperial.

I've been told that the Imperials had a larger diameter spline than the Chryslers, and the steering wheels aren't compatible. I don't know if this is true or not. Thanks for your reply. I'll keep up the hunt.
Chris

 

[challenger340]

I have this, but there are a LOT of pits EVERYWHERE. Hard to see in the pictures. No steering wheel. I have a few more parts too, chrome tail light housings, headlight mounting hardware, some other trim, and have access to a 63 newport in a junkyard. If you have interest, let me know. Condition is not very good, so I can understand if you wish to pass. You can make an offer if you wish. I do not log in every day so , no rush. thanks

 

[challenger340]

Center section is very dirty, on the inside. Just keep in mind, lots of pits. thanks

 

[FWD Look Fan]

Thanks for your post. I'm looking for the wheel and the horn rim both. If I find a wheel without the horn rim, I'll be in touch.
Thanks again.
- Chris

 

[Toolmanmike]

Thanks for your post. I'm looking for the wheel and the horn rim both. If I find a wheel without the horn rim, I'll be in touch.
Thanks again.
- Chris

You should start a Parts Wanted thread. That's how we do it here when looking for parts.

 

[FWD Look Fan]

Thanks. Will do. I'm new here!
- Chris