WANTED 1966/65 Chrysler ignition bezel nut

fullsized

New Member
Joined
Dec 21, 2010
Messages
16
Reaction score
18
Feedback: 0 / 0 / 0
Contact seller
Last owner was looking for why the engine did not crank. New relay/starter/ignition switch later and now I have it. Need the retaining nut (chrome) for the ignition switch. I have a bezel coming but the nut will be needed. In Georgia. PS it turned out the problem is with the neutral switch. Cranks fine now. Thanks for looking. fullsize
 
From the web? I have a few different ones.
 
Last edited:
From the web? I have a few different ones.
I found one on ebay with the rest if the ignition bezel and switch. It fits 65 and 66 only (Chrysler only). It has a shallow shoulder on it and 4 radial slots for the key hole light. and four notches for the tool to remove it.
1735051717491.png
1735051755888.png
You can see two slots for the light and how shallow the "lip" is.
 
That looks like it. Any number on it? Wait, no plastic in the four light slots, should be bare.
 
Here's a switch i took out of a 65. The retainer nut is shallower and only has 2 slots.
20241224_081248.jpg
20241224_081302.jpg
 
I don't really want to separate the correct retainer from the switch but I'll sell the complete switch and 2 keys and both retainers for $25 shipped.
 
Well I do not need the parts but I will do it. How do you get paid? I only have paypal or post office money order.
 
Hold on a minute, I still have the dash out of the 65. Let me see if the 2 slot retainer will work.
 
Back
Top