1966 Fury III or VIP Trim

[1966FuryVIP]

I need the long trim spear for the drivers side of my 1966 Fury VIP. I am taking the wood grain off of the trim< my wife hates woodgrain > and need just the one piece.

Also need a factory antenna for the 1966 or 1967 Mopar. I have been told they all fit for those two years.

 

[71pacecar]

Hello 1966FuryVIP

I need the long trim spear for the drivers side of my 1966 Fury VIP. I am taking the wood grain off of the trim< my wife hates woodgrain > and need just the one piece.

Also need a factory antenna for the 1966 or 1967 Mopar. I have been told they all fit for those two years.

I know you stated that you are only looking for the one piece. But I have the six long pieces for the quarters, doors, and fenders that I would sell you.
You can use what you need of these and sell off the rest. $125 plus shipping

 

[commando1]

The 66 C's have a 1-1/8 hole for the antenna, larger than most.
I search fruitlessly for an original antenna so I gave up and went eBay aftermarket generic. Just make sure the base will cover the 1-1/8 hole.

Here's a repost from another thread:

http://www.ebay.com/itm/171276756275?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Last week I had to search for a correct antenna for my '67 Newport.
I ended up with the one at the above link because it was the only one that would:
1. Cover the factory 1-1/8" hole, and...
2. Had the base where you could mount the antenna absolutely perpendicular to the fender.
3. Retractable AND removable.

Be careful what you buy because of the contour of the fender surface.
Yah, it's a universal but there was nothing else out there.

Posted via Topify on Android