Paul Amato
Senior Member
Here you go,It said something about a 440 V8 too..............................1967 Plymouth Fury III 2 door hardtop MOPAR
For Sale 1967 Plymouth Fury III 2 Dr.Hdtp. $1700
- Thread starter Paul Amato
- Start date
- Status
Looks like a great project car. I note that it has the optional rocker panel moldings so it may be a Spring Special or something similar.
68PK21 440.6bbl
Old Man with a Hat
Think we've seen this one before recently, Rio Rancho rings a bell. Doesn't look to desert fried either.
1967 Plymouth Fury III 2 door hardtop MOPAR - $1700 (Rio Rancho)
title status: clean
OH! Lookee there, it had Super Bee HOOD SCOOPS!
Gud job! Pile the parts in the valley pan so something can get down in the intake.
1967 Plymouth Fury III two door hardtop.
Good, clear, New Mexico title in my name. You get a 440 engine and a good trans. The 440 ran good. I would pull the engine, pull the heads, clean it up, reseal it and put it back in. I pulled a bunch of parts off it for my other 67 so it doesn't run now. I have the tail light, grill (a couple actually), headlight bezels and radiator. Buyer will get most everything to put the car together including a mostly new brake system. Rear axle has new axle bearings, seals and new brakes. I'll also throw in a bunch of extra parts (manifolds, starters, alternators, brake drums, just a ton of extra parts). Interior is pretty good (could use carpet) but all there although some of it is in my storage shed. If you are looking for a cheap way to get into a classic Mopar here ya go. I also have a 1967 383 engine with closed chamber heads available for an extra $250. It's stripped to the block but rotating assembly is still in it and I have all the parts except I pitched the cam and gears. $1700. Call Ray @ 5o5-25o-(see ad) and leave message if I don't answer. I work odd hours. I will call you back first chance I get.
Dodge chrysler Plymouth muscle project re-storable big block
post id: 6469515133 posted: 2018-01-22 9:16pm updated: 2018-01-26 12:49pm
1967 Plymouth Fury III 2 door hardtop MOPAR - $1700 (Rio Rancho)
title status: clean
OH! Lookee there, it had Super Bee HOOD SCOOPS!
Gud job! Pile the parts in the valley pan so something can get down in the intake.
1967 Plymouth Fury III two door hardtop.
Good, clear, New Mexico title in my name. You get a 440 engine and a good trans. The 440 ran good. I would pull the engine, pull the heads, clean it up, reseal it and put it back in. I pulled a bunch of parts off it for my other 67 so it doesn't run now. I have the tail light, grill (a couple actually), headlight bezels and radiator. Buyer will get most everything to put the car together including a mostly new brake system. Rear axle has new axle bearings, seals and new brakes. I'll also throw in a bunch of extra parts (manifolds, starters, alternators, brake drums, just a ton of extra parts). Interior is pretty good (could use carpet) but all there although some of it is in my storage shed. If you are looking for a cheap way to get into a classic Mopar here ya go. I also have a 1967 383 engine with closed chamber heads available for an extra $250. It's stripped to the block but rotating assembly is still in it and I have all the parts except I pitched the cam and gears. $1700. Call Ray @ 5o5-25o-(see ad) and leave message if I don't answer. I work odd hours. I will call you back first chance I get.
Dodge chrysler Plymouth muscle project re-storable big block
post id: 6469515133 posted: 2018-01-22 9:16pm updated: 2018-01-26 12:49pm
- Status
Similar threads
