TNT-C
New Member
Contact seller
Hey all, I just picked up the whole car in this thread:
For Sale - 1968 Chrysler 300 parts car
Consider the interior trash. Only the door panels may be salvageable, which is why I'm posting it here.
I'll be keeping all of the front end trim including fender mounted turn signal indicators, the torsion bars, the rear 1/4 panels, tail lights, all rocker trim and the hood. Most everything else is available, which I know doesn't leave much.
The floor pan seems solid from what I can tell and most of the trunk floor is solid as well. The trunk floor area behind the rear wheel is shot though.
So available parts are basically:
Front fender curb lights ($80 shipped for the pair with trim)
Floor pan ($120+shipping)
Trunk floor (75+shipping depending on if I can remove it nicely)
Doors ($100/ea + shipping)
Windows ($50+shipping each. Front windshield is shot)
Window cranks, although they are not great, ($30 shipped for all)
Rear window channel- may be some rust. I'll know once the window is out. ($40+shipping if usable)
Roof metal (tell me what part you need, will cut to serve!)
Inner fender wells ($50/ea + shipping)
Front fenders ($100 for pass. Side, $Best Offer for driver's side since it has damage... + shipping of course)
Tail panel chrome trim around tail lights (These are junk- never mind)
Other?
All are $OBO but you know, this takes time and care so please don't beat me up too badly!
I don't know what rear gear ratio it has yet, or if it's a Sure Grip. Will begin dismantling on Friday. I can provide pics of specific parts starting on Friday.
Please let me know what you are interested in and I'll do my best to get you the parts you need. Thanks FCBO!
For Sale - 1968 Chrysler 300 parts car
Consider the interior trash. Only the door panels may be salvageable, which is why I'm posting it here.
I'll be keeping all of the front end trim including fender mounted turn signal indicators, the torsion bars, the rear 1/4 panels, tail lights, all rocker trim and the hood. Most everything else is available, which I know doesn't leave much.
The floor pan seems solid from what I can tell and most of the trunk floor is solid as well. The trunk floor area behind the rear wheel is shot though.
So available parts are basically:
Front fender curb lights ($80 shipped for the pair with trim)
Floor pan ($120+shipping)
Trunk floor (75+shipping depending on if I can remove it nicely)
Doors ($100/ea + shipping)
Windows ($50+shipping each. Front windshield is shot)
Window cranks, although they are not great, ($30 shipped for all)
Rear window channel- may be some rust. I'll know once the window is out. ($40+shipping if usable)
Roof metal (tell me what part you need, will cut to serve!)
Inner fender wells ($50/ea + shipping)
Front fenders ($100 for pass. Side, $Best Offer for driver's side since it has damage... + shipping of course)
Tail panel chrome trim around tail lights (These are junk- never mind)
Other?
All are $OBO but you know, this takes time and care so please don't beat me up too badly!
I don't know what rear gear ratio it has yet, or if it's a Sure Grip. Will begin dismantling on Friday. I can provide pics of specific parts starting on Friday.
Please let me know what you are interested in and I'll do my best to get you the parts you need. Thanks FCBO!
Last edited: