C Sickness
Member
I just bought a convertible, and the power locks are dead. I have the SM, so I see the buttons, solenoids, relays, and wiring. I'm trying to understand if there are mechanical rods from the inner door buttons to the latches. If I lock the driver's door from the outside with the key, the inner button doesn't move. On the passenger's door, if I turn the lock with the key to lock, the button goes down. Unlock, and the button goes up. From the inside, pushing or pulling on the buttons is just a "rubbery" feeling, and if the switches, and other parts are being held on with loose screws. No positive detent feeling for "locked" or "unlocked".
Is the driver side missing, or maybe fell off, or is the driver's side built differently, without a rod?
It looks like the "key" to waking up the whole dead system is to get power to the #14 green wire that comes off the fuse block
Is the driver side missing, or maybe fell off, or is the driver's side built differently, without a rod?
It looks like the "key" to waking up the whole dead system is to get power to the #14 green wire that comes off the fuse block