WANTED 1970 Chrysler trim mounts and wheel arches

[czbill]

Looking for some rocker panel trim mounting pieces, 1970 Chrysler 300 convertible. Does anyone have any spares or know where I can buy some?
Also looking for decent front wheel arch trim pieces, mine have been through the wars.
Thanks

 

[Big_John]

Both things are very tough to find. Took me a couple years to find all the 300 lower trim for my 70 vert.

Best bet is to search on part number for clips and repair the wheel well trim.

Maybe @Zymurgy could duplicate the clips.

 

[Samplingman]

Time to break out the 3d printer.

 

[70DartMike]

I have a '70 New Yorker parts car, I will check if it has those clips?

 

[marty mopar]

does that clip have a part number on it?

 

[Zymurgy]

I made a mold of these or one very similar and there was way too much flex with the material I used. I can't remember why I didn't try a harder product. Are there any delicate features of the clip? I am not home for the weekend, so I can't check myself.

I am editing and adding to the post. I found a picture of the clip I made. Same basic dimensions but had same delicate features which broke with the harder product. I believe I could help you with this clip. Send me a PM and I can discuss in more detail.

I need 1 but prefer at least 2 good clips to reproduce.
.

 

[czbill]

does that clip have a part number on it?

No, I don't see any numbers on them.

 

[MrMoparCHP]

If I read the parts book correctly the part number is 6002611 and it is also used on the Crown


Alan

 

[challenger340]

PM sent. I have a post in the mopar cars being parted out section, about a 1970 parts car in a junkyard

 

[czbill]

PM sent. I have a post in the mopar cars being parted out section, about a 1970 parts car in a junkyard

Thanks, I'll check that out.