WANTED 1971 300 tilt tele T/signal lever

[mindshark13]

Anyone have one for sale or a source. Another poorly packed box. It's also the cruise type. It snapped about an inch out of where it screws?in to switch. I know nothing of what is replaceable or due to cruise the entire assembly gets replaced? Any info would be great. Thanks

 

[Polara_500]

I have a couple in a drawer, got a photo with measurements for reference?

 

[mindshark13]

Let me know if that will do. I can take more. Thanks for help
The cruise button shattered when they dropped it nothing th measure on that part

 

[Polara_500]

Is the mounting end straight out from the shaft? Can't really see it behind the tape.

 

[mindshark13]

Looks like it has a slight upper angle to it.

 

[Polara_500]

Finally remembered to drag them out. None have the connector on them, the bottom one in the pic still has the pins, but the connector body is gone, the top two you'd have to find some pins or splice the wires. They do appear to be a bit shorter than yours.

This is a shot of the pins on the bottom one. I have had some luck in the past bending the bottom a little, although I'd not really recommend it.

 

[mindshark13]

The one I have has threads on the bottom. It looks like yours takes a screw that attaches it to column. Thanks for trying.

 

[Polara_500]

Good luck.