318 poly exhaust manifold- 1965 fury

[Zach]

hi, does anyone have a RH side exhaust manifold WITH NO CRACKS for a 318 poly in a 1965 fury?

 

[twostick]

A member on the Polyspherical AKA 318 group on Facebook has 2 full sets to give away.

He's in Corning Calif so there will be some shipping involved but the last one I bought set me back $100 and another $100 to have the flange machined flat so it didn't crack when I installed it.

They don't grow on trees so I'd look into shipping cost if they aren't gone already.

Kevin

 

[Zach]

i'm not on facebook. can you please give me more/different contact info for this guy? stephens performance sells pair already sandblasted and checked for cracks for $289 plus shipping. $100 is much better!

 

[twostick]

Do you have any contact info? I can forward it.

Kevin

 

[Zach]

e-mail hotwheels43@hotmail.com, cell #4142546398

 

[Zach]

twostick, did you use the manifolds from this guy on pass. car or truck? he deals with old dodge trucks with polys. not sure if there is a difference in exit location angle on manifold between truck manifold and car manifold.

 

[twostick]

twostick, did you use the manifolds from this guy on pass. car or truck? he deals with old dodge trucks with polys. not sure if there is a difference in exit location angle on manifold between truck manifold and car manifold.

It appears the truck ones are different, at least the driver's side. I forget whether the pass side is center dump or not. If so it might work.

Kevin

 

[twostick]

Another option for you might be a set of used Gen3 Hemi manifolds with the Toth adapters. Better flowing manifold too.

Kevin