For Sale 66 Sport Fury/65 Fury? 4 dr.hdtp. Parts.

[BigCRig]

Wasn't sure where to put the ad, so I put it here. Apologize all if not in the right spot... But here's the skinny, have a shot at purchasing these two cars, both without titles. I want the buckets/console,back seat out of the S-Fury, for my 66 NewPort, is less than 2" narrower, but slighty smaller is better,I'm thinkin, and that's pretty much it. Have too buy them both,and wanted to see what kind of interest their would be for the rest of the parts. I realize pics. are vague, but will get more pics. Not tryin to git rich from the parts, looks like the $ for both would be 1200. for the cars then have to pay to move, then storage for a mo. or two. Hell of a lot of work just for the parts, I think I need. Console is busted.

These cars were listed a few mos. back, then were gone, now they are back, so yes they were on the forum before. Thx. All

 

[BJS racing]

I need the trim on the front of the fenders that go around the head lights and possibly need the deck lid off of the 65 if the inside doesn't have any or very little rust. I may also be interested in some of the side trim on the passenger side. Would also be interested in the grille and the finish panel on the rear. Specially the trim piece at the bottom of the finish panel. Heck let me know what you would possibly want for the car.

 

[65fury4dr]

i need the rear bumper on the 65. what engine was in the 65?

 

[65fury4dr]

I will need a lot from the 65 4 door.

 

[98harleydude]

I have a 65 Ply. Fury 3 and I am looking for the chrome pieces that go off the hood & down the sides of the head lights and the same for the rear trim around the tail lights , please let me know if they are available ??
Also looking for the stock Power Steering Pump & Alternator for the 318 Poly Block engine . Please let me know if you have the Poly Block engine or standard ?
Thank you
Jim ( handnhand65@hotmail.com)

 

[BigCRig]

I have a 65 Ply. Fury 3 and I am looking for the chrome pieces that go off the hood & down the sides of the head lights and the same for the rear trim around the tail lights , please let me know if they are available ??
Also looking for the stock Power Steering Pump & Alternator for the 318 Poly Block engine . Please let me know if you have the Poly Block engine or standard ?
Thank you
Jim ( handnhand65@hotmail.com)

haven't moved on the cars yet, but plan on going there tomorrow. I just don't really have a place for both of them, but will see what I can do. thank you for your interest...

 

[Fury0us66]

part wanted

I would be interested in the trim that goes around the wheel opening of the front passenger side fender. I recently purchased 2door 66 and it's missing, sorry I'm new to this so I'm not sure if they are the same as 4 doors. If you get them let me know thanks.

Rachelle ( Rachelle_kosik@yahoo.com)