67 C body electrical connectors

[MightyMats]

Does anyone know where to find the old style male blade connectors. I need to make a new fusible link for my Chrysler and I cant seem to find them anywhere.

Thank you.

 

[MightyMats]

Never mind i found them

 

[67Monaco]

Help someone else out and post up where you found them. this information might be helpful for future searches here.

 

[stubs300]

Help someone else out and post up where you found them. this information might be helpful for future searches here.

Think about it!

 

[67Monaco]

Sooooo then why does anyone post anything here on FCBO? And I would assume someone doing a search here in the forum would find the answers they were looking for or at least breadcrumbs back to the post that they found it in here.

Hell if that's the attitude why does anyone post sale ads? I mean people can do their own research and find all manner of C-body for sale.

 

[MightyMats]

I found them on Ebay

15 Mopar Male 12 AWG Gauge Wire Wiring Harness Terminal Crimp Connectors NOS | eBay

(Mopar Male Wire Wiring Harness Terminal Crimp Connectors NOS) This is what i found they are named more or less. Substitute male with female as needed.

 

[commando1]

I found them on Ebay

15 Mopar Male 12 AWG Gauge Wire Wiring Harness Terminal Crimp Connectors NOS | eBay

(Mopar Male Wire Wiring Harness Terminal Crimp Connectors NOS) This is what i found they are named more or less. Substitute male with female as needed.

Excellent. One stop shopping for all them little buggers.
Thanks for sharing....

 

[CBODY67]

That style of terminals might have been used more on Chrysler products than others, BUT they are not Chrysler-specific items. The eBay vendor just found "the source" and sells them, which is good and saves us time searching in the various terminal supplier catalogs.

I always liked that many of Chrysler's terminals/connectors/wiring seemed to be more robust than what GM used.

CBODY67

 

[Gerald Morris]

I've found the wiring in both of my 66 C-bodies to be remarkably sensible. That 4 door NYer I had in 2004-05 was what converted me to Mopar C bodies to start with! Right now I'm slowly re-wiring my tail lights where needed. Those 16 or 18 AWG wires get mighty brittle in the insulation after 5 decades.... Easy stuff.