Pauly leather
New Member
hello everyone.does anybody know where I can buy a new remanufactured harness original to the old one. If anyone knows please post. Thank you.
67 Chrysler Newport
- Thread starter Pauly leather
- Start date
traintech55
Senior Member
Or these guys
Reproduction Wiring Harnesses for America's Muscle Cars
Reproduction Wiring Harnesses for America's Muscle Cars
Pauly leather
New Member
I have no headlights tail lights and break lights. I looked under the dash and some dummy cut a bundle of 5 wires coming from the back of the car to the front that were under the dash. And there are some cut red wires under the dash that come from the bulkhead connector. And they cut the red ignition wire and ran a new one. I went through the wires a little and cannot get these lights to work.oh and also there is no power to the red wire on the high beam switch either.
First, you might see if you can determine WHY that all happened. Stop lights go through the turn signal switch, which might be a place to start looking.
Second would be to get a correct Chrysler FSM wiring schematic. That way, you can further determine the circuits which were altered. By "cavity number" on the bulkhead, for example.
Once you figure out why it all happened, then it might be easier to put it all back together again. PLUS fixing what they were trying to wire around in the first place.
CBODY67
Second would be to get a correct Chrysler FSM wiring schematic. That way, you can further determine the circuits which were altered. By "cavity number" on the bulkhead, for example.
Once you figure out why it all happened, then it might be easier to put it all back together again. PLUS fixing what they were trying to wire around in the first place.
CBODY67
bulldogchesty
Senior Member
X2 for Evans.
Similar threads
