68 Fury Tail Light Screws

[Julesva5]

Hi - I have a 1968 Plymouth Fury III and am replacing the tail light lenses. Does anyone know where to source the small screws that attach the plastic lenses to the metal tail light frames? Mine were rusted out and are not reuseable. Or does anyone know the rough size of these so I can buy aftermarket replacements?

Thanks! And Happy New Year!

Mark

 

[C Body Bob]

How many do you need

 

[Julesva5]

Ideally I need 6 per side for a total of 12, but I will take as many up to that as I can get.

 

[C Body Bob]

Let me see what I can come up with

 

[C Body Bob]

Just looked at mine it has studs from the back side. Shoot me a pic if you can. Maybe I have something from a different car

 

[Julesva5]

Ok fantastic - thank you! And just to clarify, these are the very small screws for the outer lenses, they screw into the plastic actually. Not the two larger screws that hold the inner lenses to the frame. Appreciate this!!!

 

[C Body Bob]

Do they screw in from the outside?

 

[Julesva5]

Yes - they screw from the metal frame into the plastic lense. The gasket for the whole assembly, which seals it to the car, sits on top of the heads of these screws. I will take a picture of them today and post over to you.

 

[C Body Bob]

Ok. Let me see what you have. Maybe I looked at mine wrong