Can't mount my rear arm rest. Missing clips?

thood1954

Active Member
Joined
Dec 15, 2013
Messages
336
Reaction score
126
Location
Custar Ohio
Cant mount my rear arm rests I got. There are two slots where the screws go. I know I'm gonna have to pull the panel now,but what do I do if I don't find any hardware in the bottom?
 
are you mounting just the arm rests or the entire panel? there are two large phillips sheet metal screws that go in those holes. they screw into clips in the metal body structure and can be a pain to get lined up. not sure what holds the arm rest to the interior panel though.
 
the local Lowes has a huge specialty fastening section. you probably wont find the exact part but something similar probably could be used.

Do you need those "today"?
 
The two screws hold the arm rest base and the pad as well. Whatever they screw into is present on the passenger side but not the other. Im not mounting the passenger side now because everything fits so tightly I,m gonna have to pull the seat again.
 
the local Lowes has a huge specialty fastening section. you probably wont find the exact part but something similar probably could be used.

Do you need those "today"?
Don't need them yet, I'm gonna have to pull the panel, they are supposedly new.The armrest base and pad were missing when I got the car. Note to self: No more buying/trading cars without having the extra/missing parts in hand. I'm hoping I'm gonna find what I need in the bottom. If not, Lowes or even Ace could be a solution.
 
Pictures might help...
You're right about that. I did think about that after I had tired myself out,showered and had PJs on. Lol. Too damn cold and windy today. Can't wait for spring which will probably occur somewhere around May 1st.
 
m140SzdS3YbnzHmRvzUX6zA (1).jpgmS3rYHKHP2IvJKe8v9CARNQ.jpg

search ebay for mopar arm rest screws

m140SzdS3YbnzHmRvzUX6zA (1).jpg


mS3rYHKHP2IvJKe8v9CARNQ.jpg
 
What you need are probably the special angled clip only used on doors for the arm rest. I have some I can send you.

Alan
 
Yup the two clips are definitely missing from the two small vertical rectangular holes there, get CHP to send you a couple, they look like that new clip 1970cat posted above.
 
Alan

Do you still have some of the clips that hold the arm rest on? I could use some myself.
How many could you send me? tuttled
 
Ah, I for some reason didn't realize they were in the rear.
I know that on the A-body rear armrests were an option and wouldn't have had the clips.

Alan
 
Back
Top