Chrysler Turquoise engine enamel

[Wollfen]

I've been looking for a ready source of Chrysler Turquoise for the 1968 engine and I found this at O'rielly's, but it is called green, is it the correct color?
http://www.oreillyauto.com/site/c/d....oap?ck=Search_N0487_-1_-1&pt=N0487&ppt=C0171

 

[commando1]

Buy a can and see. If it isn't, return it saying it clogged or something...

 

[Wollfen]

You're the man Stan,

 

[CanCritter]

may help
http://www.eastwood.com/paints/hi-temp-engine-paints/engine-paints.html?p=1

 

[MarPar]

Buy a can and see. If it isn't, return it saying it clogged or something...

lol

Summit has it...worked well for me on the GTX. I painted a couple of brackets and it matched pretty well to the seasoned parts already in the engine bay.

http://www.summitracing.com/parts/dcc-4120752ab

 

[polara66hardtop]

I purchase mine directly from the Dodge dealer. Factory correct.

 

[livininharrow]

I purchase mine directly from the Dodge dealer. Factory correct.

absolutely. mopar part # is P4120752

 

[detmatt]

I get mine from Roseville Moparts. (Dealership)

 

[polara66hardtop]

I bought my 69' Dart side marker lights from them, they were good to work with.

I get mine from Roseville Moparts. (Dealership)

 

[detmatt]

Dave runs the restoration parts department is a good friend of mine.

 

[commando1]

Dave runs the restoration parts department is a good friend of mine.

You're name dropping again...

 

[68plymouth383]

Does that mean we get the c body friends, and family discount there? ?...........

Dave runs the restoration parts department is a good friend of mine.

 

[detmatt]

Dave likes his name dropped on the forums and I rarely find parts cheaper anywhere else. That's David Radcliff head of the restoration parts department at Mike Rhiels Roseville Chrysler Jeep. Mention the forums for sure.

 

[Ripinator]

Dave runs the restoration parts department is a good friend of mine.

We won't hold that against Dave. . .

 

[dude69300]

Dave likes his name dropped on the forums and I rarely find parts cheaper anywhere else. That's David Radcliff head of the restoration parts department at Mike Rhiels Roseville Chrysler Jeep. Mention the forums for sure.

That's good to know Matt, I will keep him in mind, it's not too far from me. We used to have a good place in Toledo , Vin Devers chrysler dodge dealership with a restoration desk, but now they just deal with Mercedes cars. They used to host a nice car show in Oct, even seen Tom Hoovers Hemi Coronet one yr, a nice down to earth fella

 

[Steve B]

http://www.ebay.co.uk/itm/VHT-SP126-EARLY-CHRYSLER-BLUE-ENGINE-ENAMEL-PAINT-/111399268359

I use this, good stuff, correct colour and finish.....sure you will find it on Ebay USA

 

[Wollfen]

http://www.ebay.co.uk/itm/VHT-SP126-EARLY-CHRYSLER-BLUE-ENGINE-ENAMEL-PAINT-/111399268359

I use this, good stuff, correct color and finish.....sure you will find it on Ebay USA

Yah that's the blue not the turquoise I need, mine is more a green color, I am going to go with Eastwood and buy a quart of Chrysler Turquoise through them. Seems no one other than Mopar Performance sells it now in a spray can, and at $12 a can you would need at least two cans to do a goo job. The quart is only $35.00 which should do two engines. Thanks anyway.

 

[Fratzog]

I purchase mine directly from the Dodge dealer. Factory correct.

Ditto...

 

[detmatt]

That's good to know Matt, I will keep him in mind, it's not too far from me. We used to have a good place in Toledo , Vin Devers chrysler dodge dealership with a restoration desk, but now they just deal with Mercedes cars. They used to host a nice car show in Oct, even seen Tom Hoovers Hemi Coronet one yr, a nice down to earth fella

Good fall show at Mike Rhiels too, last weekend in September iirc.

 

[monaco75]

I've heard a lot of good things about hirsch paint. Looks like they have it in the spray can as well. $18 a can...

http://www.hirschauto.com/