Collection sell off.

[Ghostrider67]

I'm putting this here for now as a heads up. I will disseminate all to the correct threads after I get the inventory organized more. In Vermont.

Okay, I have a friend who is selling off his tractor trailer full, 40 ft long, of blocks, heads, pistons, rods, gasket sets, freeze plugs, etc. Plus everything in his shop including Sunnen hone, tire machine, industrial sandblast cabinet, parts washer cabinet, welding stuff, tools compressors, etc. Lathe for drums and discs, Smith 100 compressor, dump truck.

The blocks and all in the trailer are already machined, and or bored decked aligned etc, greased and bagged. heads too are rebuilt completely and milled and bagged or boxed.

340, 360, 383, 440, slant 6's, all makes as well in all sizes. Including 428, 429, Boss 302, 289, 401, 455, 454, 396, 327, 350, 400. seriously folks, going cheap.
The inventory is numbered and corresponds to the boxes and bags which are also numbered. the inventory is some 30 pages of legal tablet single spaced...stay tuned and or PM me with your desires and I will see about it. Lots of 340/360 stuff...remember,all are already machined and ready to run, not rusted solid junk. looked in several bags and boxes, could not tell if it was new or redone.

 

[Polara_500]

Damn, that's a long way away from me.

 

[Ghostrider67]

Damn, that's a long way away from me.

it IS the STICKS, but UPS still manages to find me...Fastenal ships through 3PL for nominal fees to the Fastenal store near you.

 

[Polara_500]

Yeah, I'm thinking of them - and hoping to see something I can use........

 

[75LandYacht]

Standing by sir.. thx you.

 

[65sporty]

Will you post pic's of everything?

 

[Ripinator]

I'm putting this here for now as a heads up. I will disseminate all to the correct threads after I get the inventory organized more. In Vermont.

Okay, I have a friend who is selling off his tractor trailer full, 40 ft long, of blocks, heads, pistons, rods, gasket sets, freeze plugs, etc. Plus everything in his shop including Sunnen hone, tire machine, industrial sandblast cabinet, parts washer cabinet, welding stuff, tools compressors, etc. Lathe for drums and discs, Smith 100 compressor, dump truck.

The blocks and all in the trailer are already machined, and or bored decked aligned etc, greased and bagged. heads too are rebuilt completely and milled and bagged or boxed.

340, 360, 383, 440, slant 6's, all makes as well in all sizes. Including 428, 429, Boss 302, 289, 401, 455, 454, 396, 327, 350, 400. seriously folks, going cheap.
The inventory is numbered and corresponds to the boxes and bags which are also numbered. the inventory is some 30 pages of legal tablet single spaced...stay tuned and or PM me with your desires and I will see about it. Lots of 340/360 stuff...remember,all are already machined and ready to run, not rusted solid junk. looked in several bags and boxes, could not tell if it was new or redone.

Hey! A very impressive lifetime collection of neat stuff. I would be interested in the sand blast cabinet and the parts washer too.

 

[Ghostrider67]

Will you post pic's of everything?

I will only post pics of what people are seriously interested in purchasing. This trailer is PACKED and the items are all in heavy cardboard boxes or bagged. It would be a superhuman effort to get pics of all of it. I wish I could. I will endeavor to get pics of the individual items of serious interest though.

 

[Ghostrider67]

Hey! A very impressive lifetime collection of neat stuff. I would be interested in the sand blast cabinet and the parts washer too.

Your not the only one. Who ever gets to me with the cash first wins. I will be getting prices today. This is my second day on the job..lol.

 

[Ripinator]

Your not the only one. Who ever gets to me with the cash first wins. I will be getting prices today. This is my second day on the job..lol.

Fine. Lemme know what the prices turn out to be. I know pictures may be a hassle for some of the stuff, but I'll need to see what the blast cabinet and the parts washer look like. And whether or not they work, of course. . .

 

[Ghostrider67]

I'm putting this here for now as a heads up. I will disseminate all to the correct threads after I get the inventory organized more. In Vermont.

Okay, I have a friend who is selling off his tractor trailer full, 40 ft long, of blocks, heads, pistons, rods, gasket sets, freeze plugs, etc. Plus everything in his shop including Sunnen hone, tire machine, industrial sandblast cabinet, parts washer cabinet, welding stuff, tools compressors, etc. Lathe for drums and discs, Smith 100 compressor, dump truck.

The blocks and all in the trailer are already machined, and or bored decked aligned etc, greased and bagged. heads too are rebuilt completely and milled and bagged or boxed.

340, 360, 383, 440, slant 6's, all makes as well in all sizes. Including 428, 429, Boss 302, 289, 401, 455, 454, 396, 327, 350, 400. seriously folks, going cheap.
The inventory is numbered and corresponds to the boxes and bags which are also numbered. the inventory is some 30 pages of legal tablet single spaced...stay tuned and or PM me with your desires and I will see about it. Lots of 340/360 stuff...remember,all are already machined and ready to run, not rusted solid junk. looked in several bags and boxes, could not tell if it was new or redone.

EDIT::::::
There are 78 bare blocks. 15ea. 350 Chevy, 4ea. 400 Chevy, 1ea 400 Pontiac, 1ea. Chrysler 440, 2ea. Chevy 396, 5ea. Chrysler 360, 2ea. Chrysler 340, 7ea. Chrysler 318, 2ea. Ford 351 Windsor, 4ea. Ford 289/302?, 1ea. Pontiac 428, 2ea. Pontiac 301, 2ea. Olds 350 diesel, 1ea. Chevette 98, 1ea. Ford 200, 1ea. Chrysler 273, 1ea. Chevy 262, 1ea. Chevy 265, 1ea. Chevy 305, 3ea. Chevy 307, 2ea. Chevy 292, 2ea. Chevy 250, 1ea. Ford 250, 2ea. Chrysler 225, 1ea. Ford 240/300, 1ea. Continental 162, 1ea. Continental 227/240, 1ea. Ford 240/300, 2ea. Ford 2liter, 1ea. Ford 2.3ltr, 2ea. Chevy 153, 1ea. Chevy 2.5ltr, 1ea. Wisconsin THD motor.

 

[amazinblue82]

EDIT::::::
There are 78 bare blocks. 15ea. 350 Chevy, 4ea. 400 Chevy, 1ea 400 Pontiac, 1ea. Chrysler 440, 2ea. Chevy 396, 5ea. Chrysler 360, 2ea. Chrysler 340, 7ea. Chrysler 318, 2ea. Ford 351 Windsor, 4ea. Ford 289/302?, 1ea. Pontiac 428, 2ea. Pontiac 301, 2ea. Olds 350 diesel, 1ea. Chevette 98, 1ea. Ford 200, 1ea. Chrysler 273, 1ea. Chevy 262, 1ea. Chevy 265, 1ea. Chevy 305, 3ea. Chevy 307, 2ea. Chevy 292, 2ea. Chevy 250, 1ea. Ford 250, 2ea. Chrysler 225, 1ea. Ford 240/300, 1ea. Continental 162, 1ea. Continental 227/240, 1ea. Ford 240/300, 2ea. Ford 2liter, 1ea. Ford 2.3ltr, 2ea. Chevy 153, 1ea. Chevy 2.5ltr, 1ea. Wisconsin THD motor.

Howdy ,, interested in ALL your V8 blocks and certain heads?

AFter we get past that, I would visit (or send a representative) to inspect them IF possible?

If you don't mind, please reply by via private message to see what is possible to work out

thanks.

 

[Ghostrider67]

the entire list...without prices because he has no idea what anything is worth today. So ask me and I will try to get the price from him or I will decide.

 

[Ghostrider67]

more...

 

[Ghostrider67]

more..

 

[Ghostrider67]

more...

 

[Ghostrider67]

more...

 

[75LandYacht]

Holy moly.. that’s a lot of great stuff listed

 

[Ghostrider67]

Fine. Lemme know what the prices turn out to be. I know pictures may be a hassle for some of the stuff, but I'll need to see what the blast cabinet and the parts washer look like. And whether or not they work, of course. . .

Going to see him tomorrow at noon. I will snap pics and see that they work and get prices.

 

[graeme stock]

i would be intrested in the items 1783 mopar heads 516 /and 392 hemi heads and alloy elderbrook intake mopar SB ,also the 440 block which casting dating is it
could these be packed up for shipping
thanks