Electric motor gaskets

vdk2010 · Jan 17, 2015

I'm seaching for gaskets for various electric motors on my '69 Imperial like the headlight door motor. Does anyone know if there is a source for these? Before I make my own, it would be much easier to find the right ones re manufactured!

The only one I found is the wiper motor gasket. After I made a pattern for my own...

70bigblockdodge · Jan 17, 2015

Rtv gasket in a tube, but I don't think you are going for that look.

barnfind · Jan 17, 2015

It doesn't show on the web page, maybe worth an email..

http://www.detroitmuscletechnologies.com/

vdk2010 · Jan 17, 2015

70bigblockdodge said:
Rtv gasket in a tube, but I don't think you are going for that look.

Before I do that, I make my own correct gasket.

vdk2010 · Jan 17, 2015

barnfind said:
It doesn't show on the web page, maybe worth an email..

http://www.detroitmuscletechnologies.com/

I got the 2 gaskets for the 3 speed wiper motor from their Ebay-shop but unfortunately, they don't offer other gaskets I need.

barnfind · Jan 17, 2015

Maybe just for the correct material???

68plymouth383 · Jan 17, 2015

They don't list c body specific gasket, seals... Some of our seals are b body interchangeable. Take a look here.

http://www.engine-swaps.com/Pages/ProductsType/GasketKits.html

vdk2010 · Jan 17, 2015

68plymouth383 said:
They don't list c body specific gasket, seals... Take a look here.

http://www.engine-swaps.com/Pages/ProductsType/GasketKits.html

Thanks, I try it and contact them on monday.

68plymouth383 said:
Some of our seals are b body interchangeable.

I think that's why I got the wiper motor ones from Detroit Muscle! The 3 speed wiper motor is not C-body specific...

vdk2010 · Jan 17, 2015

barnfind said:
Maybe just for the correct material???

I have plain sheets of gasket material and will make my own if I can't find what I need.

vdk2010 · Jan 20, 2015

Ok, I made my own templates. Working great for me. Pictures of the finished cut gaskets soon..!

I'm happy to share them with everyone who needs them. Just sent me a PM about it. You can just print them direktly onto the gasket material if your printer is able to do that, otherwise print them on paper, cut them out and use them as a template to transfer them by hand onto the gasket material.