Daleh42
New Member
I've recently acquired a 67 Sports Fury and working on correcting some little problems. One of these is replacing the heater core which had been leaking and was removed by the previous owner with the heater box being reinstalled without the control cables being hooked up.
I've had the core rebuilt and have reinstalled the box back in the car but....with the cables being detached at both ends I'm unsure as to the correct routing. I also seem to be missing a cable retaining clip at the back of the control box.
I do have the service manual and reviewed the paragraph on installation but was hoping someone has a diagram or pictures of the proper routing and position of the clip at the control head
Thanks in advance
Dale
I've had the core rebuilt and have reinstalled the box back in the car but....with the cables being detached at both ends I'm unsure as to the correct routing. I also seem to be missing a cable retaining clip at the back of the control box.
I do have the service manual and reviewed the paragraph on installation but was hoping someone has a diagram or pictures of the proper routing and position of the clip at the control head
Thanks in advance
Dale
