Hydraulic System Safety Switch source needed

[Retroman]

I have a 1967 Plymouth Fury III with drum drum brakes. I am looking for a part source for a NOS or repro or substitute for a Hydraulic system safety switch. Any help would be most appreciated.

 

[MrMoparCHP]

Not sure anybody sells just the switch, Inline Tube sells the tee with the switch. You could contact them and see if the switch is available separately.


Alan

 

[Retroman]

Alan:
Thank you for directing me to Inline Tube. Great resource. I talked to a tech rep today and he could not tell if part numbers BLK 245 (A bodies) or BLK 244 (B bodies) which look identical would work in a C body. Is this a part that is known to be able to cross types or is there a fluid capacity issue due to the gross weight of each class? Thanks again to you and the collected knowledge on this forum. All the best, Retroman

 

[Retroman]

After talking to several vintage Mopar vendors today. I talked with a gentlemen at Mancini racing who educated me on the different gross vehicle weights associated with A,B, and C body Hydraulic (metering block, proportioning valve) System Safety Switchs (HSSS) for brakes. The Mancini staff suggested that I pick one of their "reproductions" that services the vehicle weight that comes close to the Fury III that I have. The suggestion was to come under 400lbs in difference. After some quick research on vehicle weights I ordered HSSS for a B body. I will report back on the results as this may prove useful to other c body owners. Thanks for other views or opinions on this subject. Best, Retroman