Need to know where to get rear wheel cylinders for 1970 300

[challenger]

I figured these would be fairly easy to come by. No luck at any local stores.
Anyone know a source or the part number for cross reference? It has disc front & 2 1/2" rear drums which have leaky wheel cylinders.
Thanks
Howard

 

[66SportFury]

I had no issues getting them for my 66. Did you try to see if they had rebuild kits for them? Also, I would bet that even if it has disc brakes, the rear wheel Cyl would be the same as 4 wheel drums. Also, I would say, that they are probably interchangeable with other models.
Try here: http://www.theautopartsshop.com/aut...ysler+300+drum-brake-wheel-cylinder+1970.html

or here: http://www.partsgeek.com/catalog/1970/chrysler/300/brake/wheel_cylinder.html

 

[thrashingcows]

Hit up Rockauto. Sure they will have some.

 

[challenger]

I did some digging and found them. I couldn't find a definite answer from any of the listed sites but I found the Imperial information for the 11"X2.5" rear drums and crossed the number to a Napa number. I have a Napa about a mile from me and picked up a set and replaced them so it's good to go.
Thanks

 

[wihaltom]

I got rear wheel cylinders for my 66 from O'Reilly. No problem.