For Sale Parting out 72 New Yorker body
- Thread starter MoparOrNoCar
- Start date
- Status
![IMG_1577[1].jpg](https://www.forcbodiesonly.com/mopar-forum/data/attachments/47/47328-1cb124b43c9cae9febab06bc79ee8f0e.jpg "IMG_1577[1].jpg")
![IMG_1575[1].jpg](https://www.forcbodiesonly.com/mopar-forum/data/attachments/47/47329-605cd7a78e82f46da6c4e1d11e0abbe4.jpg "IMG_1575[1].jpg")
![IMG_1555[1].jpg](https://www.forcbodiesonly.com/mopar-forum/data/attachments/47/47330-2308c73ccf53aa3bb141bb35f53a744b.jpg "IMG_1555[1].jpg")
![IMG_1578[1].jpg](https://www.forcbodiesonly.com/mopar-forum/data/attachments/47/47331-f6caa946d6ea9f4f436da919fadb00c1.jpg "IMG_1578[1].jpg")
69CoronetRT
Senior Member
I'd take the fender tag, broadcast sheet, IBM card or any other factory documents you find. 
MoparOrNoCar
New Member
I'd take the fender tag, broadcast sheet, IBM card or any other factory documents you find.
pm me your address
Mr C
Senior Member
Looks like it may have a good trunk pan/ floors for somebody...
MoparOrNoCar
New Member
![IMG_1554[1].jpg](https://www.forcbodiesonly.com/mopar-forum/data/attachments/47/47349-093e6cd001f0d3e008187afda55a0119.jpg "IMG_1554[1].jpg")
69CoronetRT
Senior Member
Thank you. Greatly appreciated.
MoparOrNoCar
New Member
My mirror has some pitting on it but the glass is still tight.
![IMG_1621[1].jpg](https://www.forcbodiesonly.com/mopar-forum/data/attachments/47/47454-046b2df6f2872d2e750f8e284fb1a257.jpg "IMG_1621[1].jpg")
Here's the package tray.
![IMG_1625[1].jpg](https://www.forcbodiesonly.com/mopar-forum/data/attachments/47/47455-e4a5d5dc90ddf26eccbb58d46c824d71.jpg "IMG_1625[1].jpg")
pics isn't loading right??? I'll try again if this doesn't work
Golden Banana
Well-Known Member
Do you have the squirted nozzels for the front windshield washers please?
MoparOrNoCar
New Member
pm sent
MoparOrNoCar
New Member
pm sent
The Moffittman
Member
I'd like to know if the fender mounted turn signals are any good.. My driver's side is just pooched, the screw hole is split, the lens broken, etc.
Also, out of pure curiosity, how much for the rear bumper to get shipped to 22601?
Also, out of pure curiosity, how much for the rear bumper to get shipped to 22601?
Looking for windshield washer reservoir. Still there? Pics? price shipped to 23322.
The Moffittman
Member
BobK, what does your reservoir look like? I might have one..
JO 753
New Member
I could use the DS fender. How much?
I'm nearly dun prepping the PS that I got last month. I replased the bottom 1/4 with stainless steel, so want to do the same for the DS.
I'm nearly dun prepping the PS that I got last month. I replased the bottom 1/4 with stainless steel, so want to do the same for the DS.
fjrdoc
Member
Do you have the wide lower trim that runs along the passenger side quarter panel?
- Status
Similar threads
- Locked
