She's Here

[mdh157]

pics tomorrow......and btw, anyone know what i can use to pop the trunk from the inside after taking the back seat out? it's too small to crawl through and I close the keys in the trunk after getting distracted with a cell phone call...........naturally, it was BS and the call wasn't necessary.

 

[johnniesrotten]

a small kid with a screw driver ixie: sorry couldnt resist

 

[commando1]

or a six foot screwdriver.
Sorry. I'm just as bad.....

Posted via Topify using Android

 

[mdh157]

trust me, that's already on the agenda, it's getting him to crawl in there in the dark ,assuming he will fit.

 

[mdh157]

or a six foot screwdriver. Sorry. I'm just as bad.....

no, you are actually worse

 

['69FuryIIIConvertible]

Hmmmm I don't know if you access to the following but this is what I did on my car when I first got it and the keys ended up in the trunk

Used a bit socket (slot screw driver 3/8 bit socket) and 2, 3/8 drive 3 foot "Transmission" extensions.

Nick

Looking forward to the pictures it's a beautiful car.

 

[Big_John]

I've put a few long ratchet extensions together and reached through the opening and taken the latch off.

 

[commando1]

Hmmmm I don't know if you access to the following but this is what I did on my car when I first got it and the keys ended up in the trunk

Used a bit socket (slot screw driver 3/8 bit socket) and 2, 3/8 drive 3 foot "Transmission" extensions.


Nick

Looking forward to the pictures it's a beautiful car.

In other words, a six foot screwdriver. Sheesh, Mark....

Posted via Topify using Android

 

['69FuryIIIConvertible]

In other words, a six foot screwdriver. Sheesh, Mark....

Posted via Topify using Android

Yeah basically Stan.

Nick

 

[1978 NYB]

It doesn't help you now.......but I keep an extra set in my wallet specifically for these situations.

 

[detmatt]

The screwdriver won't work with the working cylinder in it, you'll have to take the latch off as suggested or grab the keys with a hook or magnet.

 

[300rag]

The screwdriver won't work with the working cylinder in it, you'll have to take the latch off as suggested or grab the keys with a hook or magnet.

Now there's the answer.

 

[theos911]

19.95 + s/h

 

[mdh157]

It doesn't help you now.......but I keep an extra set in my wallet specifically for these situations.

they only had 1 set!!!!!!!!

I think i may be able to use a coat hangar and lasso them if I can see them with the light. I do not have a 6 foot screwdriver.

 

[Greg B.]

Off to a flying start! ;)

Good luck with the coat hangar. I might duct tape it to a broomstick.

 

[mdh157]

great idea 300..........as lnog as it's not right in the far back I should be able to get it with my magnet........extends out to abt 28". I'm going to be really pissed if I have to drive up to sears to buy a few long extensions, in that case the car will sit until next weekend. Perhaps my neighbor will have something, he is a car guy.

 

[1978 NYB]

they only had 1 set!!!!!!!!

I think i may be able to use a coat hangar and lasso them if I can see them with the light. I do not have a 6 foot screwdriver.

Doesn't everybody have a 6 foot screwdriver in their toolbox???

 

[commando1]

Everyone has one. It's called an 8" screwdriver duct taped to a 6' PVC pipe.

Posted via Topify using Android

 

[theos911]

I have a 4' T8 screwdriver.

 

[commando1]

WhereTH would you use that????

Posted via Topify using Android