WANTED 1973 c-body disc brake spindles or full assembly

[jtalberts]

Either looking for someone to sell me or point me in a direction of some reasonably priced front disc brake assemblies for a 73 c-body so I can do the conversion on my 66 Fury. Just shoot me a pm.

 

[jtalberts]

Found them at Fredericksburg auto. They have a huge selection.

 

[Catfish]

Mind sharing what the cost was? Spindles only or backing plates and everything.

 

[jtalberts]

$250 for everything. I know it was more than the scarebird, but I was wanting the whole assembly just to make sure I had everything I needed.

 

[68plymouth383]

The calipers you can use as cores for the new ones...... That will save you a little bit.

$250 for everything. I know it was more than the scarebird, but I was wanting the whole assembly just to make sure I had everything I needed.

 

[Donny]

I did this conversion on my 300, and, found they ride at a slightly different height, and, I've had to crank up the Torsion Bars a bit more than earlier, at least this is a working theory. A variable also could be that I have heavier duty rear leaf springs with one additional leaf in the bundle, which likely has caused this 'shift'. Easy to get parts from the local noodnick AutoZone, just remember to tell them 73 Chrysler full size lest they'll be looking up the older model. As I said, they're noodnicks!

 

[SF-66TC]

Found them at Fredericksburg auto. They have a huge selection.

Is Fredericksburg auto just an auto parts store like O'reilly's & Autozone?
What parts did you get for $250?

Steven

 

[pmschmitt]

Yes please do share the contact information.

 

[commando1]

Google.
Took me less than 2 minutes.
Try it someday. It's not hard.


https://plus.google.com/app/basic/105457595304196130619/about?gl=us&hl=en

 

[tallhair]

http://lmgtfy.com/?q=Fredericksburg+auto+salvage,+fredericksburg+va&l=1

 

[commando1]

I love it when you do that.

 

[68plymouth383]

Welcome nice car! !

 

[68blackbird]

http://lmgtfy.com/?q=Fredericksburg+auto+salvage,+fredericksburg+va&l=1

I dig lmgtfy....

 

[SF-66TC]

Google.
Took me less than 2 minutes.
Try it someday. It's not hard.


https://plus.google.com/app/basic/105457595304196130619/about?gl=us&hl=en

Didn't know Fredericksburg auto was a SALVAGE yard - it wasn't mentioned in the post. BTW, I did google it and came up with a listing of an auto parts place in Fredericksburg and one even named Fredericsburg auto parts. Checked them out and lead me to a dead end, thus I asked if it was a place like O'reilly's & Autozone we have here on the West Coast....

 

[commando1]

Well, they were USED parts, ergo....

 

[pmschmitt]

Jtalberts...did you go and pick them up or would they ship to you direct.