360 Aluminum Manifold, eBay Knock Off on Edelbrock?

[1970FuryConv]

Many sellers on eBay are selling these no name brand small block intakes. $130 vs. Weiand $380 and Edelbrock $400
Has anybody used one? Quality or Junk?
Small Block Dual Plane Intake Manifold for Chrysler Dodge Challenger Plymouth | eBay

 

[CBODY67]

Looking at the picture, it will only work on factory a/c cars from model year 1979 and prior. 1980 and later factory a/c cars need the twisted thermostat mount, as the basic Performer 318 intake has.

Looks decent, with a 2 Yr Guarantee. FWIW

 

[71Polara383]

I've ran 2. They are great for the price!!!
Also the dual bolt pattern, magnum or LA is PERFECT for putting a modern magnum in place of an old LA

 

[1970FuryConv]

Looking at the picture, it will only work on factory a/c cars from model year 1979 and prior. 1980 and later factory a/c cars need the twisted thermostat mount, as the basic Performer 318 intake has.

Looks decent, with a 2 Yr Guarantee. FWIW

Car I'm trying to buy is 1973. Thanks for the tip, Willis! Will post pictures if I buy.

I've ran 2. They are great for the price!!!
Also the dual bolt pattern, magnum or LA is PERFECT for putting a modern magnum in place of an old LA

Great info! Thanks Wyatt.
Possibly using Carter AFB 625 cfm square bore. 1.5" diameter primary throttle blade, 1.625+" secondary. Think there'd be any issues with throttle blades opening after mounting it?

 

[CBODY67]

Car I'm trying to buy is 1973. Thanks for the tip, Willis! Will post pictures if I buy.

Great info! Thanks Wyatt.
Possibly using Carter AFB 625 cfm square bore. 1.5" diameter primary throttle blade, 1.625" secondary. Think there'd be any issues mounting it?

Mounting? Not if they drilled the stud holes in the correct places.

 

[1970FuryConv]

Mounting? Not if they drilled the stud holes in the correct places.

I corrected the question