For Sale Or...1970 Cuda - 340 Clone - RESTORED - RED on BLACK

[tbm3fan]

Hi there,

For sale is my fully restored 1970 Plymouth Cuda 340 Clone.
Numbers Matching 318 Engine, made to look like a 340 Cuda!
Very correct down to the detail, this is an excellent restoration!
Fully restored, under carriage, interior, and engine compartment!

1970 BH23 Barracuda, Cuda 340 Clone
-Very Strong 318 V8 Engine!
-Smooth Automatic Transmission!
-Very good Gloss Mopar Red paint!
-Excellent Interior, Seats, Dash, Headliner, Door Panels, Carpet, Etc.
-Excellent Undercarriage, freshly painted, and fully restored!
-Excellent Engine Compartment, wired to factory specs!
-Correct Rallye Wheels with White Letter Tires!

A fantastic car to bring to car shows and take home a trophy!
Makes a great daily driver and a true attention getter!
Clear CA Title, No Accidents, and Original Blue Plates.
Cudas like this are HARD to find, and even more desirable than ever!

Price is $38,000 (Cash, Wire Transfer with hold, Bitcoins)
Please call or text Jeffrey at 831 236 2693
Thanks!

http://sfbay.craigslist.org/scz/cto/4790014645.html

Now wouldn't the 318 look more like a 340 with a 4bbl intake and carb?

Phone number is Santa Cruz but the background is San Diego. Same guy as 71 Cuda

 

[patrick66]

$40K for a 318 car. Pathetic.

 

[68plymouth383]

(No Accidents) Look at the rear bumper!! Its been pushed in............

 

[68plymouth383]

It looks like it was painted re-sale red by Earl Scheib.............. I'll bet it has rust issues.

 

[Samplingman]

Would have been nicer as a fully restored, dead stock 318 Barracuda...

 

[1978 NYB]

I bet he still gets offered $20-25k and still holds out....

 

[68plymouth383]

You would think for 40,000 the car would have a battery hold down............

 

[Fratzog]

$40K for a 318 car. Pathetic.

Didn't you notice it's an E Body LOL.

 

[tbm3fan]

You would think for 40,000 the car would have a battery hold down............

Not to mention the cheesy fuel filter up top and the bypassed heater core with the bare openings in the firewall.

Well at least I am learning that all one needs to do to make a 340 clone is to paint a strip on the side with 340 in it. Damn, can't get any easier than that to make a mountain of change...

 

[cm23uoc]

Substitute clone with Clown.

 

[70NPORT]

A 340 Cuda clone powered by a 318 with a super tiny carburetor. This just gets more ridiculous day after day with these cars.

 

[detmatt]

I have no opinion of it but I don't think there's anything wrong with the rear bumper/valance area.

 

[MrMoparCHP]

The rear valance looks to be bowed out in the middle which leads me to believe that it may have had a quarter replaced.


Alan

 

[thrashingcows]

And what is up with that trunk spoiler??? The E-body should have the flat bull wing tipped unit, that thing looks like a hunk of flat aluminum.

I bet they didn't even replace any f the front end parts....just disassemble, paint, install new boots and re-assemble....look at the "rebuilt" front end.

 

[patrick66]

Not to mention the cheesy fuel filter up top and the bypassed heater core with the bare openings in the firewall..

Not only a bypassed core, but the A/C is missing! No compressor, hoses, dryer, or condensor. Forty large, and the thing has a bad heater core and all of the air conditioning is gone. Some guys have the balls to ask $40K for such a joke of a car...and a 318 car, at that.

Were this a TRUE 340 car with everything functional and complete, that price might be in the realm of reality. I guess living in LaLaLand is good for some, and makes others delusional.