Search results for query: *

I looked through that section a couple times, and to me it seemed for all of them it was referencing the console, definitely wasn't the most clear. Glad to know they exist on some cars thanks to you, mrfury68, I'll see if Murray Park has any. It's clear my car didn't have any originally and I...

Wausau Wisconsin

Bump

Join me in welcoming @70monaco to FCBO.

Finally got around to doing the bulkhead bypass I mentioned I was gonna do earlier. Used a step drill bit and drilled two 8mm holes just under the bulkhead connector, spot painted it with some black spray paint to prevent rust, before sticking a grommet in each hole. Kinda shitty pic; took it at...

the hub is worn

Progress! Ran out of painted parts, gotta prep and paint the sway bar, tranny dropout and all the little brackets and doodads tomorrow. I know it's the easy part, but man slapping fresh stuff on a car is so gratifying. Also, how do I renew the sway bar bushings? The clamp is welded...

There are a lot of opinions on this, the reproductions are good but the lines are not as sharp s the originals. Even the originals are not that consistent. If the Charger handles look like the Polara then they will probably work, once you have them you can then determine if they are exact or...

Car has a slightly more rose tint to it now. No idea how old the repaint is. Here is a shot of the original FK3 Burnt Orange that is still in the engine bay vs what the previous owner had it painted in

Thanks, I haven’t found a broadcast sheet yet. Previous owner had the seats and dash recovered at some point. Maybe they were disposed of at that time.

The rear are 15x8 with 275/60-15 tires. The front are 15x7 with 255/60-15. The Challenger T/A you have pictured has the #2944450 15x7 black steel wheels which have the hub caps and 3" trim rings. Front and rear are the same 15x7. The T/A and Plymouth AAR Cuda had biased tires, larger G60-15 in...

This Challengers wheels are kind of what I'm going for, not sure if they were 14 or 15, but to me the proportions look just right there, especially in the front one

Thx for all the info, I learned a lot! On the red car, what's the tire size? The slightly shallower 15x7 wheel I'm assuming is in the front?

The wheels on your cool looking Polara look like the 80s Chrysler M-body (Gran Fury/Diplomat/LeBaron/Fifth Avenue) 15"x7" steel wheel (#4126675). They could also be found on some R-bodies. That wheel will accommodate up to the 3" deep Chrysler trim ring. The 2" trim ring already mentioned will...

What color is the car now? How old is the repaint?

T= 440 0= 1970 D= Belvedere Beautiful car. Does it retain a broadcast sheet? Or a build sheet? Or any other factory documentation?

Do you have a detail thread on the car? Curious about more details.

Your inbox is full

You saw the subframe is pretty rusty, right? Send me a PM. They had it out there for $3500 at one point. Depending on what they offered to you, perhaps I can buy some of the parts from it and get it down to what you wanted to pay for it? If so, I am northside of Indy, we could potentially do...

The main parts that differ are the heads and pistons. But - it seems that ~9:1 pistons for 413s are available now/again ($600), so 413s might be worth rebuilding again. With people wanting $1000+ for a needs-rebuilt motorhome 440, if someone has a 413 they should investigate using it? If one...