Search results for query: *

Just finished getting the back lower nut/stud out. Rest are broken loose. Pretty tough to get to. On break now lol

1956 plymouth fury headliner trims dirty flexible , not brittle . there is a left and right 60$+ shipping

this was for sale on the mainland here in BC for a long time. its been mentioned on here at least once. it belonged to a friend, i could have bought it for 10k cdn$. at the time i had a 440 71 fury custom suburban so i didnt bite on it. he did the dual exh, put on the wheels & tires and then...

(ok, I'll quit being a smarta##) I got it running because I needed to move it. I filled it up with water- it didn't leak so I guess the hole rusted up- but it was running badly. So, I spent a bit of time having read the correct tune-up procedure for the Holley that's on it. Once it was up to...

Howdy. Got a link to your cars?

I need to measure. Length is probably less than 3 feet for 1970 Fury. However, looks like battery position for Imperial is completely different

select message, click leave conversation and then click go

PCV on pasenger side is correct for 1969. If you cap it off, does the breather have vents that allow it to still work as a breather?

This is a OEM V8 Throttle And Kick Down Springs. These are original, not china knock offs. They came off of a 1968 383ci Roadrunner, but will also work on other years and engines. $25.00. Local pickup, or buyer pays shipping.

This is a Pair Of NOS 340 Four Barrel Hood Emblems #3443246. They are original, not china knockoffs, and are in mint new condition. $125.00. Local pickup, or buyer pays shipping.

A coffin or a dead body on the roof on a wagon. HMMM that makes me think of a movie. As an aside ponder this: My friend Jim was hitching a ride years ago in Phoenix. He got one in a wagon. At some point he turned around as something was rolling back and forth in the rear. He asked the driver...

This is a OEM 1960's Small Block Bolt On Timing Tab. I'm not sure which years and engines used this style. It is in good condition, just could use a cleanup. $15.00. Local pickup, or buyer pays shipping.

Here's some pics of the solenoid pack, easy to remove, two screws, you can see the holes in one pic. The one removed is bad, notice the waxy paper that should surround the outside of the coil is missing except one small piece. Their just a simple coil winding. The spol the winding is wound on is...

How does one delete private conversations? I can select all of them but find nothing that allows me to delete and then start a new conversation which I am prohibited from doing.

This is a pair of Mr. Gasket Mopar Small Block Header/Manifold Gaskets. They are new in original packaging. $20.00. Local pickup, or buyer pays shipping. (They are over $36.00 at all the performance parts stores)

This is a Set of Four OEM Mopar 1960's Headlight Assemblies. They are from a 1964 Dodge Polara 500, but they will also fit many other models and years Chrysler, Dodge and Plymouths. They include the high and low beam headlights, the headlight buckets, and the chrome headlight ring. Everything...

One last thing, those shift forks that slide in and out of the solenoid should be dry and clean. Never grease the part of the fork that slides in and out of the solenoid.

I personally have no experience putting 15x7 cop wheels on any application with full wheel covers. Just dog dishes. they (15x7 Mopar cop wheels) will fit virtually any years' 5x4.5 (large) Mopar bolt pattern, and almost any car, as back spacing is a mounting-friendly 4.25 inches. It just...

Shift fork, the small gear slides into a slot on the shift fork. The solenoid moves the shift fork in and out of the solenoid when activated which in turn moves the gear on the other end of the shift fork. If they don't in and out easily, the solenoid is toast. The engineers in those days were...