Search results for query: *

On my 70 fury, I knocked off a couple of the vacuum lines and one was cracked that I cut and plugged on last year's catl drive. There's a white striped one and a green striped one. FSM doesn't seem to detail which hose goes where that I can find. It looks like the white stripe goes into the...

Anyone able to take a hi res photo of the wiring diagram for the turn signal circuit inside the steering column? 70 fury, no cruise or tilt. Thanks!

I took the moldings off in 1999 to paint and one was creased so never put back on. I've got some better ones now but lost my clips. Bought some from someone else on here. But how do these little clips attach to the molding?

And then a dropped it and it cracked wide open :mad:

I might have it pressure tested before I install, but it does fit

Almost have it out. I can't remember do you roll it up or down on it's way out? And do I have to take the bottom panel with the outlet for the driver's side vent off? I can't get it out from the dash just yet with that in place. I don't think I had put the console in the car yet when I did this...

I last had it apart 15 years ago and thought I was careful to put the clamps back clocked so that I could get at the head. Not so lucky on the outboard one. I got it a little loose but now slid to where I can't reach. Can't get it or the hose rotated or pulled out, any ideas?

Before pulling the heater box for heater core and ac drain leaks I wanted to test operations. Everything but the vacuum to water valve is ok. It's been dead for some time actually. I've got the ash tray and middle vents out so I can see the vacuum regulator off the controls. Is the smaller...

Can't find it under the car and the floorboard got soaked bringing the car back to Chicago. Can't feel it near the heater hoses underneath the car.