Search results for query: *

yes

Join me in welcoming @Imp66 to FCBO.

Is it a vacuum system or is there another reason?

18K...I thought that was a "little" cheap !!! The 300 on the left side of the hood...is that correct?

I know that the Boneyard in Cardinal Ontario has a 23 hardtop.. The Boneyard

Take the tension off the torsion bars if not done already. I prefer pulling the bars after the stub is removed but othets may prefer before hand.

I messaged you .

sparkling burgundy was the 2nd most popular 71 imperial colour, behind #1 honeydew and ahead of #3 tahitian walnut

Here's where I'm at, currently. Engine and trans is out, everything else underneath is unhooked, save for the frame itself. What I'm wondering is should I remove the torsion bars now, or after the frame is out? Your input, as normal, is appreciated.

The bearing is pressed on but you can remove the brake backing plate and use one of those needle greaser things that you can put on the grease gun hose. The brake adjusters, if I remember correctly, can be turned 360 degrees so if you back off too far you are essentially moving the brake shoes...

I used to have our family daily drivers equipped with these flush adapter tees full time, but removed them over time and just connect a temporary "jumper" hose in with the tee until flushing is done then remove the tee/jumper, like I did/do on my hobby cars. So, I have a few. These were all...

I am looking for a rear windshield for a 69 Fury 2 door hard top, model 23. Curves outward. Preferably in Canada as Shipping will be too much. Chris

Another scam. Look at all the cars that they listed and the prices. Mostly too good to be true. Here's the car on BAT. 1959 Chrysler 300E Hardtop

Thank you for the input. My short wave converter seems to have been manufactured in 1955, according the Mopar part #. So, perhaps used in the 56 Imperial/DeSoto Chrysler Car lines. I haven't tracked down the mounting bracket, nor the operators guide. That all seems to be intuitive, as the radio...

Note the B64 anti-skid brakes @nitoh

I have sold all my loose gaskets. I have gaskets but it’s on a parts car which would require removing the glass and such. I’d sell it but it would take some work to get it out and be priced accordingly. Feel free to PM me.

Any chance you want to sell that spare windshield gasket? haha... I'm trying to find a W604 as well!!

Join me in welcoming @neockder to FCBO.

Thanks, someone did the same to mine :thumbsup:

I had a feeling it was! Cant be that many around like that. I had spoke to the man several times and was going to drive up from texas to see it, but other things came up. Thats when I found my burgundy 68 300. That is a real nice one!