Search results for query: *

One of the cars that I've had over the years was a 1958 Plymouth 2 door hardtop. I swapped the entire axle assembly from an E body Barracuda. It bolted right in. I got it at Carlisle complete with the housing, axles and backing plates for $50. This was about 15 years ago, and I got it from a guy...

Thanks for the suggestions, greatly appreciated!

Not working from memory. The figures I mentioned came out of the Order Guide for 1971. Including the CR figures. I didn't remember that 8.8CR, but then I was not paying attention to or aware of how Chrysler was changing the cams and such in particular cars, back then. I DO remember the 383...

eBay 1966 Chrysler 300 interior trim

There are a number of vendors here on this site whom I would trust. National Moparts and Nigel Mills - www.nationalmoparts.com for just about anything. Brakes, fuel, suspension and steering - Craig from @mobileparts Carburetors @Woodruff Carburetor Specialties Interior @Quirey Quality...

My memory is that 1970 SFGT had the standard cam and dual exh (rated at 360hp?) but 71 had the HP cam and was rated at 370hp - down from 375 in the 1970 HP rating. IIRC the CR in 1971 a little lower than 1970 (was around 9.2 vs 9.5 or 9.7) and that went along with the 5hp drop. CR was...

Thankyou! I’ve used this site for a few issues, and you’ve had answers on here that have already helped me out! Here are a few more pictures. Sorry it’s late, I work til 9:00 PM basically every day. I took the dry rotten 14” wheels/tires off the car, replaced with some 17” wheels, and...

Post lots of pics and vids guys! Sure wish I was there.

Maybe very small couple thousand dollars trade ok.No financing original California low 85,000 miles air conditioning power steering power brakes run and drives beautiful serious inquiries. Not here to trade! We are specifically car rv yacht Listed 3 days ago in Chino Hills, CA Message Ve Benz

At first I thought a $30k L-code car should have a nicely-restored grille. Then I saw the front valance and SMH...

Join me in welcoming @Furious69Sport to FCBO.

@Ripinator I was thinking of a slightly-larger bezel that would clamp the original to the doorpanel with small tasteful stainless screws (probably 6 to ensure it didn't bow in hte middle). Could be CNC'd out of aluminum and then polished. Would take a little time, but I think I could make...

Look at that sweet 1972 New Yorker 2 door on other side of the Hurst. I prefer it by a mile

I am interested to see how David's Hurst compares to my memory of my 70 300 with TNT. Depends on whether I can bring the madman out in David for 10 secs or so.