Search results for query: *

  1. mikedrini

    Power steering question

    Factory Service Manual
  2. mikedrini

    Need Parking Lock Cover for 1965 Torqueflite Transmission.

    @Henrius try to contact Pat Blais via eBay. He's a seller of all things torqueflite and I think his handle is torqueflitepatty if I recall. He sold me some parts for my 64 NY pushbutton tranny.
  3. mikedrini

    1964 Tourqueflite 727 Fluid Leak

    Hey Bob, I have on my 64 NY and it's an o ring. I would suggest using a white marker to mark where the adjustment wheel is currently set, pull it out, some fluid will leak out, but most will be in the pan, replace the o ring and you should be all set.
  4. mikedrini

    Why was there a motor-mount change from '65 to '66 ?

    I'm sure someone has, but not everyone checks the site on a daily basis. You post it in the Gold Member section too?
  5. mikedrini

    Adding drain plug to gas tank

    Yeah, got mine from Van's as well, Gas Tank -1964-1966 Imperial, 1963-1964 Chrysler, Dodge 880-Mod Tank
  6. mikedrini

    Adding drain plug to gas tank

    I bought a replacement tank for my 64 NY and it came with the drain plug already installed.
  7. mikedrini

    ‘67 Fury 440 Stroker Rearend Humming Noise

    Have you tried jacking up the rear end, putting it in drive, and trying to narrow down precisely where it's coming from?
  8. mikedrini

    General A727 Potential R&R questions/suggestions.

    I have a 19 spline TC and you won't find any of those with different stall speeds. I had mine rebuilt to handle a higher stall (2800-ish). Not sure of the name of the company, but they came recommended to me by my transmission guy. You may want to consult a tranny shop and see what they say, or...
  9. mikedrini

    FI pump in tank

    Out of morbid curiosity...what lesson did you learn?
  10. mikedrini

    Stalls when put into gear

    I'm with @Big_John and I've had this same issue. For me it was a combination of the timing not being advanced enough and my idle screw not being adjusted correctly. Commenced with chasing my tail until I went back and started from basics with TDC, factory specs, setting the carb idle and mixture...
  11. mikedrini

    Can I change the oil pump relief spring in the car?

    Not sure what engine you have, but I can on my 383 and 440.
  12. mikedrini

    Anyone replace a fuel tank sender with tank in the car

    I've done it, but I had that special tool, which you don't need if you drop the tank. If you're lying on your backside with a Skoal in your mouth and a flashlight in your ear daydreaming about Shania Twain...it gets tricky. Dropping the tank isn't all that difficult and it would probably be...
  13. mikedrini

    66 383 what fuel pump should I get?

    Carter does make a quality product. I have an electric in-line from them and it's been great. Although now that I've said that, I'm sure it'll crap out. Guess I better go get a mechanical pump now...dang it.
  14. mikedrini

    Mopar engine adjacent.

    I like it. Looks like an old Esso Station on Main Street.
  15. mikedrini

    how to free or prevent sticky valves and lifters

    Same thing essentially, just cheaper given the Wally World Super Tech Brand, to each his own.
  16. mikedrini

    how to free or prevent sticky valves and lifters

    You can always go with either of these as well:
  17. mikedrini

    how to free or prevent sticky valves and lifters

    Some of us add this after each fuel refill to aid with lubing the top end. It has an additive that is safe for our older engines. I believe you add 1 oz per 5 gallons of gas. I've had luck with it and @detmatt was the one that told me about it.
  18. mikedrini

    8-3/4 breather?

    The 8 3/4 on my 64 NY came with a breather
  19. mikedrini

    8-3/4 breather?

    My breather screwed right in to the axle housing. Can you not unscrew the entire breather?
  20. mikedrini

    Dodge pumpkin Question

    Hopefully you don't carve that pumpkin.
Back
Top