Search results for query: *

@david hill installed an underhood insulation pad on Buttercup that I bought from Motormall back in January. It first and looks great -- everyone coming to Carlisle can check it out there.

Put it in a 12x12xlength box. Use Pirateship.com it's a ups discounted shipping program. Good luck FYI ups ships up to 150lbs

I made a video showing the condition of the seal and the holes I found in the sheet metal. Let me know what you think I should do. Stripping the paint, cutting out the sheet metal, and repainting the car are not currently options available to me.

We've been talking for a while on it. We couldn't get shipping situated any one on here have experience shipping a bumper? Neither of us do

Welcome

Welcome

On the flush, I got some evapo rust for a friend, and it comes out black, when it cleans out the rust. I have not had this in this engine yet, mainly because I pulled the block drains, had to drive out a rust plug inside, but flowed nicely after plug pushed out. Also, what I can see from the...

Way too much. I'm not an A/C authority so I can't give you much help, but I do know that over-charging with 134a is not going to help. There's some formulas for pressure, but I think most just measure output temperature and charge until it's blowing real cold. Too much and the output...

This is a 1966/67 Mopar LH Inside Door Handle #2583393 It came off of a 1967 Coronet, but will also work on other Mopar years and models. It is not new, but is in good driver quality condition. $15.00. Local pickup or buyer pays shipping.

This is a 1962-1964 Big Block Ballstud/Bracket W/Grommet. It came off of a B-body, but may also work on other years and models with these bellhousing numbers. It is original, not a china knockoff, and is in good condition. Just could use a cleanup. It fits 10.5" bellhousings with casting...

Not at all, it was a peaceful drive with no traffic and mainly a farming community - I felt no threats at all, met a lot of friendly folks at the destination. That area is close to the southern border but I personally have never felt any threats from that either - mainly just hard working...

I have also seen capillary tubes taped on low side tube surface and heard them working. Factory material shows that they originally go inside thermowell immersion to avoid engine temperature to mess things up. Judging by the video, I suspect there is no possibility to get two capillary tubes...

Pulling the seat out will make it easier to take the door card off.

It wipes off. I can post pics later this weekend.

What pressures are you seeing when the system is on, windows down and set for full cold and max A/C? Also, report the register (interior vents) temperature.

I hear you on that water pump. I'm just grasping for straws. I've put about five six once cans in. But I had a leak initially. I'm not sure how much leaked out. Currently, I'm just going by the gauge pressure. Per the low side gauge, I'm at 50psi @95F. I would guess I'm overcharged but the last...

Did you feel like you were in a Mannix episode? I know, I know, this is a 1970 300 convertible, not a 1971 300 hardtop.

Bolt that baby on and see what happens. If they are loose there's a good chance it isn't locking up when needed.

Yes, it's got a clutch fan and a fan shroud. I currently, have the a new clutch in hand. The old one was working but a it's action was a little too loose for my taste.

Don't feel alone @Snotty as I hadn't heard of it ever before either and actually I was kind of shocked that it felt like a different State - it is something like 1-1/2 hour drive for me and it was wide open plains and no traffic at all and gorgeous mountain views in the distance. Overall it...