Search results for query: *

I have a garage find 66 fury III its 100% stock I have done a few things to spice it up like putting new wheels and cleaning up the poly 318 but as it runs great it is quite gutless so I'm on the fence on if I should swap a 360 in because it's pretty much bolt right in or should I go for big...

Wasn't volunteering. It was an idea that popped into my head. It's a 3 on my Eisenhower matrix, the guys with the questions can pursue as they see fit.

Well, I think it’s been like 1.5-2 years since I was on here last, but for those curious I am back. And my Chrysler is still with me. I put her into storage at the end of 2022 with the whole “I’ll fix ___ later” mindset, as things were going but weren’t yet gone. They all broke during storage...

I have a new 24x24 piece of 22 gauge sheet metal and my new 24” brake showed up. I just need to mount it to a piece of plywood so I can clamp it to my work bench.

I gave up on fixing my crappy welds on that 22 gauge sheet metal. I probably could have used a bunch of filler, but that’s not my style. So I drilled out the spot welds and removed the whole side. I also ordered a 24” sheet metal brake. I will make a new panel and spot weld it on like the...

That's exactly right. Its the same MC, and one can get a good knockoff version with or without a booster, if one wishes. My knockoff still works very well.

Well I doubt any of you will read this since it’s been ages but despite my absence 2 years later I still own her :)

There is one position for each bar, when inserted into the FRONT socket, where there is about 1 inch of a gap between the adjuster cam or arm and the top of the adjuster nut. This position gives the maxium capability for twist or torque loading (and hence ride height) of the bar when the...

Thanks for volunteering to look into that issue. Let us know what you find out. :thumbsup:

I believe that the only difference in the MC for manual to power is the little retainer on the rear that holds the piston in place. Looks something like this. No boot like the manual does. (actually, looking at it after I posted, this is probably a bad example as the boot is sitting there...

"six turnin', four burnin" Heavy Metal

My parents had one was I was about 5 or 6. Was a convertable, same color combo. I just loved that car. You did good!

In the FSMs of that similar vintage ('66 and '70), it mentioned that when removing the front bars, to position the special tool to remove them with about 1/2 or so to the rear of the bar. Where more of a "clean shot" could be had with the hammer. It ALSO mentioned that this was where there was...

Thanks for the reply and information. Being that you are in Mexico, if you can get into USA Facebook, you might search for a 1991 Chrysler Imperial owners group and ask the same question. Just be aware of "data charges" and such. Most of the online dealers' Chrysler parts depts used to use...

Thanks for the welcome

Love to see more pics!

Welcome aboard and what a beautiful 300, I hope you have the best of luck and you get it just the way you want it!

:thumbsup:

Hope they are ok, whichever guy you're referring to. It does sometimes take a while to get shipping quotes, or even finding a carrier - and to that effect it's probably more difficult to find one willing to do a haul starting way up in Maine. It may take weeks, speaking from experience. @TX9...