Search results for query: *

Does anyone have/know a cross reference part number for this single action thermal expansion valve sold by Bouchillon? Single Action Expansion Valve - R134 - Bouchillon Performance Engineering It's what I need but it's about triple the price that it should be. Hoping to find the...

Does anyone know what the clamps are called that hold the AC line to the inner fenderwell (going from drier/receiver back to the firewall)? They are like a half circle, plasti-dip insulation, held in place with a sheet metal screw. I need 3 of them, but don't know what to call them or if...

So I’m converting to the Sanden style compressor and I’ve got the thermal expansion valve that supposedly works with that set up. Question it is I don’t know where this part of the tube goes to. Any suggestions?

I’ve got the three 7/16” nuts removed and the three 1/4” screws (indicated by the screw driver tip) removed that seem to be holding the retainer/plate to the housing, but the motor and wheel aren’t coming out. Can’t tell if I’ve missed something or it’s just stuck and I need to pull harder. Any...

1966 Chrysler Newport with factory AC. The output of my blower motor seems weak compared to modern vehicles. I assume that's to be expected, but even with my 3 speed fan on full blast and the setting on DEFROST, the output of air to the windshield is weaker than I expect. I thought about...

Is this where you add the mineral oil to the RV2 to sump? If so, how much? The FSM says fill to 2 5/8”, but where do you measure that at?

So it got to 85 today and I wanted to see if the AC worked. Unsurprisingly, it did not blow cold. It wasn’t hot air, but neither was it cool. I drove for about 15 minutes with it on because although it wasn’t cold, it was still nice to get a breeze on my face, which of course the heater and...

So if I need to remove the AC compressor for some reason, is it possible to just unbolt the bracketry and "set it aside" like on newer cars, or do I have to evacuate the system and physically unbolt all of the connecting tubing, etc.? It seems like all of the connections are hard lines . . ...

I'm going to plumb in a water temp. gauge soon when I get the correct thermostat housing installed, and I've found a suitable place for the sending unit to go right underneath the AC Compressor. It currently has a "plug" in it. But I'm curious as to where the hot/cold light sending unit is -...