Search results for query: *

I am working on 3D printing some knobs for a bluetooth project of mine and want to practice both basic and period correct styles. I'm thinking radio knobs would be a good goal. But I dont have any examples anymore. Sold the radios I had. So I'm looking for someone with a caliper and camera to...

I wanted a more original looking shifter knob for my Hurst shifter so after too much time on the net I pulled together some parts and came up with this. The ball is 2" hardwood with 1 side flat. Drill a hole all the way through and put a bolt in it and then into your drill which now servers a...

Don't freak out - the PO cut the valuable armrest covers not me. But saddled with this I decided to to embrace the sacrilege and put better 6x9 speakers in the holes. With a relatively deep 6X9 there are only a few ways they will fit. I found after I mounted the speaker to the armrest that the...

In a 69+ car about how far is the front of the console to the plastic heater vent? Here is a pic of what I mean with a console without top plate. Its about 3" I know its tight up there and hard to see so whatever u get from the edge of the top plate to the plastic heater vent is fine. thx

I stole this pick from Bill Fury's for sale add. Go buy it from him. My question is how the insert is attached because I'm trying to remove mine. I know there are NOT though bolts attaching it and I think I see some imbedded studs in the vinyl so maybe they slide into a keyway?? Or may just...

Im rebuilding a 65 (I think) 6 way power seat and am wondering about the disassembly of the gear head from the screw jacks. I removed the roll pin but am not sure how the head comes off. Splines? Threaded? Or maybe it doesnt. Looks like others have done this (@Zymurgy) so want to ask before I do...

After almost getting my hands on a woodgrain wheel I started looking a little harder but the price (with horn and everything) was too much right now so I got one that arguably looks like it. Since I'm getting more woodgrain in the near future with a console I figured a respectable wood wheel was...

In preparation for some dash work on my 69 fury I thought I should be ready with a center speaker replacement. I know there are other simpler options out there but this is what I came up with. Its a convertible so I knew I needed speakers that could play loud and take some power (i will be...

I'm sure most of you guys have seen or used this combo. What I find useful is everything cures instantly so you can fix, sand, drill, and paint all in 15 min if needed. Here is some work I did today. The center plastic section under my steering wheel was first and it had a few of the mount holes...

I did this a few years ago and thought I lost the pics but found them. I didnt have the original metal speaker cover but I did have this plastic cover from a sedan and epoxy and a hot knife to slice through plastic. So I cut out the center section and found some speaker grill. The holes are...

I got this interior aftermarket part from a parts car and wondering if its worth anything in terms of $$ or general interest. I probably wont keep it. Any comments on what you would do with it? thnx

This is plate above the instrument cluster that provides general lighting down on the gauges. This particular piece is from a 69 VIP and has a little blue spot light that looks to just shine on the Plymouth insignia on the left of the dash , or the ac vent. Can anyone confirm the purpose of this...

Here is what I started with.

In my mind a brand new carpet is one of the last things done and certainly after you are sure no more water will be coming in. My convertible is not there yet so I decided I had nothing to lose and "repaired" my existing carpet. I apologize for the lack of in process pics. The black carpet had...