Screenshot_20210118-231753_eBay.jpg
Screenshot_20210118-231753_eBay.jpg

68 Ragedout Top

68 Fury 111 4spd convertible
Overview Gallery

Comments

H
Late car with the Hurst shifter, interesting. Seems like the switchover to Hurst from Inland was later on C Bodies than on A and B Bodies, don't know an exact date.
 
Fury Man Van
20210310_180254.jpg
Well I'm leaving in the morning (Again) so I decided to check out the torque boxes, they all seem to be intact along with all the rear unibody.The subframe in the front seems to be intact, what I thought was rusted out on the driver side turned out to be the floor board folded down and a bunch of mud built up there. Sorry for the bad lighting ONLY had a few minutes. Just trying to keep the updates going with what little time I have
20210310_185448.jpg
20210310_185410.jpg
20210310_185330.jpg
20210310_185306.jpg
20210310_184950.jpg
20210310_184859.jpg
20210310_184707.jpg
20210310_184648.jpg
20210310_184609.jpg
 
K
Good luck mate, the rust is far from bad on that looking at the pics, I have the same car here in the UK, L code ......just needs that 4 speed set up in it LOL.
Cheers.
 
D
Fury Man Van said:
View attachment 444872 Well I'm leaving in the morning (Again) so I decided to check out the torque boxes, they all seem to be intact along with all the rear unibody.The subframe in the front seems to be intact, what I thought was rusted out on the driver side turned out to be the floor board folded down and a bunch of mud built up there. Sorry for the bad lighting ONLY had a few minutes. Just trying to keep the updates going with what little time I have View attachment 444854 View attachment 444855 View attachment 444856 View attachment 444857 View attachment 444858 View attachment 444859 View attachment 444860 View attachment 444861 View attachment 444862
Click to expand...
Can you tell me what book that is with the production numbers? Great car. Thank you.
 
Fury Man Van
Fury Man Van said:
View attachment 444872 Well I'm leaving in the morning (Again) so I decided to check out the torque boxes, they all seem to be intact along with all the rear unibody.The subframe in the front seems to be intact, what I thought was rusted out on the driver side turned out to be the floor board folded down and a bunch of mud built up there. Sorry for the bad lighting ONLY had a few minutes. Just trying to keep the updates going with what little time I have View attachment 444854 View attachment 444855 View attachment 444856 View attachment 444857 View attachment 444858 View attachment 444859 View attachment 444860 View attachment 444861 View attachment 444862
Click to expand...
Dan did you get your Book yet?
 
Fury Man Van
well I had to load her on my trailer today so I could get a good look at her underwear (lol)
Called the man that I bought her from and got a Very interesting story and he told me that he dad some tags for me
 
Fury Man Van
I think that if by January 1 if I can't find a suitable part's car this 6cyl Fury is going to be the donor
 
D
Before you try to remove the pistons etc., be sure to soak the whole engine in Rust Ripper or a similar product to remove as much rust as possible. This will greatly aid in getting things apart. Once the rust is gone, the engine can be treated with Break Free or a similar good penetrating oil, or soaked in a bath of diesel oil. Doing the above will help prevent micro fractures in the cylinder walls from seized pistons and rings. Lifters are also likely to be seized in their bores, so take care in removing them as well.

Dave
 
Fury Man Van
Davea Lux said:
Before you try to remove the pistons etc., be sure to soak the whole engine in Rust Ripper or a similar product to remove as much rust as possible. This will greatly aid in getting things apart. Once the rust is gone, the engine can be treated with Break Free or a similar good penetrating oil, or soaked in a bath of diesel oil. Doing the above will help prevent micro fractures in the cylinder walls from seized pistons and rings. Lifters are also likely to be seized in their bores, so take care in removing them as well.

Dave
Click to expand...
Many thanks Dave for your advice and I will do
 
You must log in or register to reply here.

Item information

Category
Member Garages
Added by
Fury Man Van
Views
4,583
Watchers
7
Comments
26
Last update
Rating
5.00 star(s) 1 ratings

More in Member Garages

More from Fury Man Van

Share this item

Back
Top