For Sale 1968 Chrysler 2 door p.w. Parts package

[detmatt]

A couple of nice Coupe doors, actually all of these parts are from a Newport convertible, with tinted glass and power regulators just missing the motors.
Rear glass with power regulators, convertible only on the glass I'm guessing.
Nice power window wiring harness.
All of the door and rear interior panels with power window switches that all toggle nicely.
I’ve been getting $200 for the master switches and $50 each for the singles but these are not quite as nice cosmetically.
All of these parts are driver quality and not without flaws.
I’d sell the whole package for $500. Shipping would obviously be up to you but I’m willing.
I will sell parts separately but the best deal is going to be for all of it especially if you can come get it.
I also have the convertible top frame, the sheet metal windshield frame, the top motor, cylinders, plumbing, etc. the entire dash assembly and miscellaneous related bright trim parts that I’ll post up soon.

 

[detmatt]

 

[detmatt]

 

[cbarge]

FYI Vent window frames convertible only.

 

[detmatt]

FYI Vent window frames convertible only.

Really?

 

[cbarge]

Really?

Yes.
I was given a pair for the BoaB since it had tinted glass.
The tips or tops of the frames have a sharp/flat edge/top to match the convertible top.
The hardtop frames are rounder to match the solid A pillars.
After removing the glass it too is different. It has a straight top where hardtops have a rounded tip.
4dr hardtop and convertible vent frames are taller than Fastop,too BTW.
I learned the hard way over the years of gathering parts for the BoaB,LOL!
I can check my 68 Parts Catalogue I suspect the side glasss is 'vert only.

 

[Mario Adorf 68]

I Need the vent gear driver side

 

[detmatt]

I Need the vent gear driver side View attachment 354893

I’m sorry but I’m afraid I’ll be stuck with the door if I start parting the internals out of it. If nobody steps up for the complete doors after some time goes by then I’ll consider it.

 

[Mario Adorf 68]

 

[detmatt]

About to list the entire(almost) dash out of this car.

Here it is!

https://www.forcbodiesonly.com/mopar-forum/threads/1968-newport-dashboard-assembly.53759/

 

[m38jeepman]

Yes I may be interested in a door for my gold New Yorker. I need to investigate how the trim on the bottom of the door attaches.

 

[detmatt]

 

[detmatt]

Bump

 

[detmatt]

All 6 pieces of side glass are sold.

 

[detmatt]

I Need the vent gear driver side View attachment 354893

@Mario Adorf 68
I’m ready to sell these if you still need.
Darn, I’m sorry to report that the drivers side has the same problem yours does.

 

[detmatt]

I’m parting the doors out but keeping the hinges and the main weatherstrip. still have the door shells with all the latch hardware and the vent window frames as well as power regulators for the front and the manual vent regulators.
The rear quarter regulators are also no longer available.

 

[detmatt]

@Trailer Park

 

[Trailer Park]

@Trailer Park

I'll take the 2 single rear switches

 

[detmatt]

I'll take the 2 single rear switches

Ok let me get back to you on Monday. I’ll take a closer look at them and get you a price.
Thanks brother!

 

[detmatt]

@Doug King
Here’s the stuff, let me know if you’re interested and I’ll make you a nice deal.