SOLD 1968 New Yorker parts

Status
Not open for further replies.

detmatt

Old Man with a Hat
FCBO Gold Member
Joined
Nov 14, 2010
Messages
28,212
Reaction score
27,493
Feedback: 29 / 0 / 0
Contact seller
I just acquired a lot of parts from a '68 New Yorker 4-door sedan. I normally wouldn't put myself through this but the parts are really in great condition and I figured I would see if any of you guys need any of this stuff before I put it on Ebay. The car was supposedly a 20k mile car that had somehow rotted out around the torsion bar anchors and was deemed not worth repairing. I have almost the entire interior and from the looks of it the mileage statement was true. Anyways I still have to sort through the boxes of parts and want to clean the interior stuff before posting it so I'll start with some exterior stuff.
Body parts have minimal rust, only minor swelling at some seems.
I have all 4 doors which are complete with power, tinted windows still in place, hinges, nice weather stripping and even the door panels are useable. More on those later.
The big stuff needs to go first because of the room it takes up so for starters:
really nice trunk lid complete with lock and key.
Asking $150 + shipping.
located in the Detroit area.
could potentially deliver to the Nats in Columbus.

image.jpg


image.jpg


image.jpg


image.jpg


image.jpg
 
Front bumper assembly is a great driver quality piece as pictured. I spent 10 minutes scrubbing it down with some aluminum foil and this thing will shine up very nicely with a little more effort. 1 dent near center as pictured otherwise arrow straight.
asking $200 + shipping from Detroit.
I have more pics if needed.

image.jpg


image.jpg


image.jpg


image.jpg
 
If you're looking for something from this car not listed yet let me know.
 
I'm looking for some window motors and a right fender skirt. But it would have to be shipped to Alaska. What ya got?
 
How many motors?
Have the skirts but they didn't fair as well as all the other parts that I have. They're straight and have no rust holes but have some thin spots. Definitely useable. It looks like the drivers side is missing the lever.
I'll ship if you pay!
Btw, welcome to the site from the Motor City!
now that you're here you might as well go and introduce yourself and post up some pics of that '68.

image.jpg


image.jpg
 
is it the same as a 66 I think I have a right one of those. the fender skirt I mean

I'm pretty sure I started this thread to sell parts that I have that I don't need. If you have some of your own parts to sell I'd suggest starting your own thread. I'm sure spdcrazy won't mind having some choices but let's try to be considerate about it.
 
Without tearing my door panels off I'd say I need all motors minus the drivers front. What color is the skirt? Sorry I haven't posted a intro, keep an eye out for it in a few min
 
The only brake parts that came with the lot is the master w/booster and the brake pedal assembly. It would have said disc brakes on the rubber pad on the pedal if it were a disc brake car, right?
 
Without tearing my door panels off I'd say I need all motors minus the drivers front. What color is the skirt? Sorry I haven't posted a intro, keep an eye out for it in a few min

I have all four motors but you should know that there is a simple and cheap repair for these if the electric motor itself is still working and its the drive that is no longer working.
hows the rest of your interior and what color is it? You saw the skirts I pictured above and I assume you're asking the color of the one that 70bigblockdodge has?
 
Sorry I did not notice your attachment. Almost the same green. Lol. How much shipped to 99603?
 
For the skirts and how many motors? Do you need the motors?
 
Let's start with the skirt . I really only need the passenger side, but if you don't want to split I understand. Also do you have the b post interior panel for the drivers in white? I
 
I have a complete light green interior that is so nice I'd hate to sell in pieces, I mean dash pad, door panels, power bench seat, back seat, headliner and its trim, all the plastic panels, hell I threw away the carpet!
Ill get a shipping cost tomorrow but $40 bucks get you both skirts.
 
Because of the size, shipping of the skirts would be just under $50. Other things could be added to this box without changing the cost to ship, just so you know. Standard size boxes are considerably less to ship to you, more like $30 or less, I'm told.
 
Here are the quarter panel extensions.
$50 for the pair + shipping.

image.jpg


image.jpg


image.jpg
 
Fender mounted turn signals. One of them is missing the connector otherwise pretty nice.
asking $25 for the pair + shipping.

image.jpg


image.jpg
 
The only brake parts that came with the lot is the master w/booster and the brake pedal assembly. It would have said disc brakes on the rubber pad on the pedal if it were a disc brake car, right?
Think so since it was a big deal back then.
 
Think so since it was a big deal back then.

I'm no pro on mopars but my new Yorker has disk brakes and the pedal doesn't say it. Tho my hub caps do!

I'll grab those skirts from you. Prob some other things, but let me inventory my stuff real quick
 
Status
Not open for further replies.
Back
Top