1970 Plymouth Sport Fury Coupe

[furious70]

Tail lights? Front marker lenses? Front side lenses? Rocker moldings and clips?
Plastic trim on inside of trailing edge of door jam?

 

[Turboomni]

quote: Amazed by what the vinyl top did to the roof :quote



Must of had a vinyl trunk too!!!

Actually a very valid point , I Never take my vinyl top Fury out if it is going to rain. If I ever have it repainted I will very likely remove it.

 

[Wollfen]

Tail lights? Front marker lenses? Front side lenses? Rocker moldings and clips?
Plastic trim on inside of trailing edge of door jam?

I will take pics of said items, some are not so hot.

 

[Anthony 71 Paisley]

If they're in decent shape, I'm looking for the housing for the passenger side (parking light ?) Under the bumper . I'll take them as a pair if it makes it worth your time. Thanks

 

[cuda hunter]

before you crush the car I'm into the fender tag and or build sheet. Your inbox is full.

 

[Rapidtrans777]

@Wollfen , your inbox is full. What kind of shape are these in, left and right and the small trim piece that connects the two bottom pieces? Thanks

 

[Wollfen]

If they're in decent shape, I'm looking for the housing for the passenger side (parking light ?) Under the bumper . I'll take them as a pair if it makes it worth your time. Thanks

I will check them out for you, it may take a couple of days, Im getting snowed under with requests lol.

 

[Wollfen]

before you crush the car I'm into the fender tag and or build sheet. Your inbox is full.

@Wollfen , your inbox is full. What kind of shape are these in, left and right and the small trim piece that connects the two bottom pieces? ThanksView attachment 384957

I will get onto this for sure, inbox will take time to clear as I take care of requests. Please be patient, I will get to this. Thanks guys.

 

['69FuryIIIConvertible]

Killed it.

Sadly they usually do, have a VIP in my shop that has basically no roof left.

 

[Wollfen]

Thanks

devinism@netscape.com for pics, if that's easier

Here are a couple of pics, the switch clicks crisply too. Looks to be good.

 

[Wollfen]

Tail lights? Front marker lenses? Front side lenses? Rocker moldings and clips?
Plastic trim on inside of trailing edge of door jam?

Some pics for now, more to follow.

 

[Wollfen]

If they're in decent shape, I'm looking for the housing for the passenger side (parking light ?) Under the bumper . I'll take them as a pair if it makes it worth your time. Thanks

Here is a pic of it in situ, i will pull it out soon and check it better.

 

[Wollfen]

@Wollfen , your inbox is full. What kind of shape are these in, left and right and the small trim piece that connects the two bottom pieces? ThanksView attachment 384957

The stainless strip is perfect, but the corner pieces are pitted, check the pics to see.

 

[furious70]

Here is a pic of it in situ, i will pull it out soon and check it better.

View attachment 385096

I was asking about these in my post, along with what you posted. Taillights are garbage but I'm still interested in seeing more of everything I asked about

 

[Devinism]

Here are a couple of pics, the switch clicks crisply too. Looks to be good.

View attachment 385089 View attachment 385090

Thanks for the pics.

That is the headlight switch. The wiper switch that I am looking for has a small ceramic resistor hanging off to one side.

 

[Wollfen]

Thanks for the pics.

That is the headlight switch. The wiper switch that I am looking for has a small ceramic resistor hanging off to one side.

Oops sorry, I'm on it.

 

[Shaker19981]

can i see a close ups of the rockers and wheelwell moldings

 

[policefury1]

Killed it.

I'm going to be parting this car soon, most parts are available, I need to clean up my junk!
Hi, are the ignition wires original? and what carb is on it/ Does the carb have the idle solenoid on it also.
Any chance this had the reese class three tow set up???
thanks, you can pm me,
dustercat@comcast.net

View attachment 384819 View attachment 384820 View attachment 384821 View attachment 384822 View attachment 384823 View attachment 384824

 

[Dimitri Romanenko]

Front valence rotted?

 

[Wollfen]

Oops sorry, I'm on it.

Im sorry to say the switches I have are for two speed only. They don't have the ceramic resistor on the back.