383 kickdown rod spring

[rl000999]

which is correct spring pulling forward or backward -illustration or picture ???

 

[1970FuryConv]

I have always used spring pulling backward to keep the back of the kickdown slot engaged with the throttle linkage stud

 

[Toolmanmike]

Some applications have the spring on the front and some at the rear, as long as the spring keeps the slotted rod against the pin on the throttle.

 

[rl000999]

Some applications have the spring on the front and some at the rear, as long as the spring keeps the slotted rod against the pin on the throttle.

I need this rod....what is the part # or description I should look for ???THX

 

[Toolmanmike]

I need this rod....what is the part # or description I should look for ???THX

View attachment 694079

I'll let someone else answer that. I have info on small block applications.

 

[polarus]

Air/Fuel, Carburetor Linkage/Linkage Studs :Mega Parts USA

www.megapartsusa.com

You can place an ad here, someone might have a used one.

 

[CBODY67]

I need this rod....what is the part # or description I should look for ???THX

View attachment 694079

Is the arrow intended for the carb linkage stud or the flat metal "rod" for the front of the throttle pressure modulation linkage?

The carb stud can be had from Holley or Edelbrock, OR any salvage yard with a Chrysler Corp vehicle carb in it. Two lengths, one for cruise and one without cruise. Manual transmission studs are even shorter.

CBODY67