68 Town & Country hood torsion bar rollers

[doooodaaaah]

68 Town & Country hood torsion bar rollers how are they held on the bar?

 

[bigmoparjeff]

I think they're held on by one of these:

340Pcs Star Nut Star lock Push-on Locking Washers Clips Fastener Assorted Set | eBay

340PCS Starlock Washer. It is commonly used in our daily life and in industry. The starlock washer exerts a spring force between the fasteners head and the substrate to create more feiction and resistance to rotation.

www.ebay.com

Jeff

 

[doooodaaaah]

I think they're held on by one of these:

http://[URL][URL]https://www.ebay.c...GHGXoHp0Ezceyvs1Jn/fqchtWg==|tkp:BFBMkv3podlk

[/URL][/URL]

Jeff

Thanks Jeff I had wondered if it might be those
I took the other side off to look but there’s nothing holding the rollers on that side either other than the torsion bar end had been slightly peened over the rollers won’t come of that side,i can’t see that been the factory solution‍?

 

[bigmoparjeff]

I'll try to remember to take a look at one tomorrow to confirm for sure.

Jeff

 

[bigmoparjeff]

I took a look last night and couldn't see anything since the roller is up against the track bracket. I may have a loose torsion bar in my parts collection that I can look at. I'll see if I can find it tonight when I get home.

Jeff

 

[doooodaaaah]

I took a look last night and couldn't see anything since the roller is up against the track bracket. I may have a loose torsion bar in my parts collection that I can look at. I'll see if I can find it tonight when I get home.

Jeff

Thanks Jeff

 

[bigmoparjeff]

No dice last night on the bars. I have one more place that I can look on Wednesday. I'm 95% sure that I have them somewhere.

Jeff