71NewYorkMan
Member
Contact seller
I recently acquired a parts car for my Kinda project from a Derbier who got out of the business after he purchased this car. He started stripping it, but didn't get very far. The car has 90% of the parts I need for Kinda. It also has a fairly complete CS23 PLA3 Grey interior in "Very Good" to "Near Excellent" condition which I have no need of. This car appears to have been very well kept. The original owners home shows 2 garages in Google Maps. The Derbier kept it in his shop from 2005 till Jan 2019 when he moved it out to make room for his other projects. Hopefully someone else can make use of these parts-
1 x (left / right) front split bench in grey leather. $200
Includes- seats, power seat back releases, anodized aluminum base trim. NOT INCLUDED-power seat bases, motors, harnesses, switches.
1 x rear bench seat in grey leather. $75
1 x left door upper and lower panels $50
1 x right door lower panel $25
1 x dash pad $50
1 x steering wheel w/ horn pad (minus medallion) $25
1 x left sail panel trim including c-pillar pillow $25
1 x right sail panel trim including c-pillar pillow $25
I have 3 of the 4 pull straps that were mounted in this vehicle. They will go with the panels they were originally fitted to, or separately if someone asks.
The leather and vinyl on the seats is in remarkably good condition. It appears to have been kept clean and "oiled" when the vehicle was in service. The dash pad has no cracks or signs of "sun fade" . The door and sail panel trim panels DO NOT have torn out mounting clips! The fiber board backings in these panels are not water damaged or decayed! In the following pictures, you may notice "light" spots where I spot cleaned the surfaces to reveal condition.
If you see something that interests you, let me know. Not trying to profit here, but merely wish to defer my parts costs of my own project. Shipping / transport for all parts TBD. I would be willing to travel up to 300 mis one way for the costs of fuel, a meal, and a handshake.
1 x (left / right) front split bench in grey leather. $200
Includes- seats, power seat back releases, anodized aluminum base trim. NOT INCLUDED-power seat bases, motors, harnesses, switches.
1 x rear bench seat in grey leather. $75
1 x left door upper and lower panels $50
1 x right door lower panel $25
1 x dash pad $50
1 x steering wheel w/ horn pad (minus medallion) $25
1 x left sail panel trim including c-pillar pillow $25
1 x right sail panel trim including c-pillar pillow $25
I have 3 of the 4 pull straps that were mounted in this vehicle. They will go with the panels they were originally fitted to, or separately if someone asks.
The leather and vinyl on the seats is in remarkably good condition. It appears to have been kept clean and "oiled" when the vehicle was in service. The dash pad has no cracks or signs of "sun fade" . The door and sail panel trim panels DO NOT have torn out mounting clips! The fiber board backings in these panels are not water damaged or decayed! In the following pictures, you may notice "light" spots where I spot cleaned the surfaces to reveal condition.
If you see something that interests you, let me know. Not trying to profit here, but merely wish to defer my parts costs of my own project. Shipping / transport for all parts TBD. I would be willing to travel up to 300 mis one way for the costs of fuel, a meal, and a handshake.
Last edited: