Anyone sell new windshields for 69 Polara?

[polarnj]

My body guy is having trouble removing the windshield surround moldings since someone siliconed and glued it in there pretty tight. He said removing the moldings might damage the window, so before I start I'd like to know if I can get a new windshield if it cracks.

Unfortunately, I'm a bit stuck since I've had the whole roof repaired and ready for vinyl except for this sticking point

 

[azblackhemi]

Vintage Glass sells them. Good product but expensive when you add in the shipping. I bought one for a member here 6 months ago and the glass was around $465 and shipping was $300. With instalation it's right at a grand.

 

[SIPLOWGUY]

Try this guy

Classic Auto Glass - Bob's Classic Auto Glass

High-quality vintage auto glass & restoration parts for classic cars at Bob's Classic Auto Glass. Explore our catalog of classic glass.

bobsclassicautoglass.com

 

[polarnj]

Thx everyone, this is a "just in case" scenario

 

[SIPLOWGUY]

Thx everyone, this is a "just in case" scenario

I had a good experience years back when I bought glass for my 1962 Dodge. You might also want to reach out to Bill fury. he has a lot of C body parts and may have glass.

 

[3C's & a D?]

Body guys aren't necessarily glass guys. If your current windshield is good, an experienced glass guy should be able to remove it without damage. When I did glass I was called to a few body shops to do glass removals and later installations. Might be worth a call?

And depending on the severity of the offending silicone, the moldings might get twisted or bent. These moldings are actually pretty easy to come by, I have several back up sets in my parts hoard.

 

[polarnj]

Body guys aren't necessarily glass guys. If your current windshield is good, an experienced glass guy should be able to remove it without damage. When I did glass I was called to a few body shops to do glass removals and later installations. Might be worth a call?

And depending on the severity of the offending silicone, the moldings might get twisted or bent. These moldings are actually pretty easy to come by, I have several back up sets in my parts hoard.

yeah, I'm not worried about the moldings as much as damaging the windshield. Can that happen if the moldings are really stuck in there?

Without removing the moldings I can't put another vinyl roof on (at least I don't think so)

 

[413]

Body guys aren't necessarily glass guys. If your current windshield is good, an experienced glass guy should be able to remove it without damage. When I did glass I was called to a few body shops to do glass removals and later installations. Might be worth a call?

And depending on the severity of the offending silicone, the moldings might get twisted or bent. These moldings are actually pretty easy to come by, I have several back up sets in my parts hoard.

Very true, but a glass guy of today doesn't have to deal with metal trim around the glass. It's all held together with urethane. Cut it out and toss it, install everything new. Try asking a current glass guy about doing glass in gaskets like our 60's mopars, most won't even consider it.

Trying to take off trim and glass that is drenched in sealer is no easy task no matter how much skill and patients the person has.

 

[polarnj]

Very true, but a glass guy of today doesn't have to deal with metal trim around the glass. It's all held together with urethane. Cut it out and toss it, install everything new. Try asking a current glass guy about doing glass in gaskets like our 60's mopars, most won't even consider it.

Trying to take off trim and glass that is drenched in sealer is no easy task no matter how much skill and patients the person has.

How exactly do you get them off without damaging the glass? Maybe applying a heat gun or something?