WANTED Auto Ventshades 65-68 4DR Sedan NYer/Newport

[Jdlov]

Hoping to find a 4 piece set of stainless steel auto Ventshades for a 65-68 4DR sedan New Yorker/Newport. Would offer a good price. Thank you.

 

[MYSINBIN]

Hoping to find a 4 piece set of stainless steel auto Ventshades for a 65-68 4DR sedan New Yorker/Newport. Would offer a good price. Thank you.

FWIW, I found two sets for my cars in ten years of looking on eBay.

They are pretty rare, but they are out there.

John

 

[Jdlov]

FWIW, I found two sets for my cars in ten years of looking on eBay.

They are pretty rare, but they are out there.

John

Two sets!!! I only need one set ol' buddy, ol' friend, ol' pal!!! Take pity on an orphan and his needy lil' Newport sedan. I'd fork up some loot.

 

[crazyboutwagons]

do you have any measurements. I have a set from a 68 Plymouth fury 4 door sedan that I found in a junk yard that don't fit my wagon the rear door on a wagon is wider.

 

[MYSINBIN]

Two sets!!! I only need one set ol' buddy, ol' friend, ol' pal!!! Take pity on an orphan and his needy lil' Newport sedan. I'd fork up some loot.

Sorry man, I have two 4DSD's and they are destined for them. I am still trying to find the spring clips that snap into the window frame to secure them. Harder to find than the ventshades themselves.

I'd rather use the clips than drill holes for the tiny screws they came with.

Keep looking, they'll come to you eventually.

John

 

[MYSINBIN]

do you have any measurements. I have a set from a 68 Plymouth fury 4 door sedan that I found in a junk yard that don't fit my wagon the rear door on a wagon is wider.

I can take measurements of my set tomorrow and let you know.

Stay tuned.

John

 

[Jdlov]

Crazyboutwagons: I though that I read on a forum here that the 67-68, 300, New Yorker, Newport, Polara, Monaco, and Fury 4dr sedans all shared the same glass. If so, it might follow that your Fury ventshades might fit my Newport. I would like to buy them if we can establish that. If you are selling them that is. Thanks, JD

 

[Jdlov]

I can take measurements of my set tomorrow and let you know.

Stay tuned.

John

Would you be able to post some photos of your ventshades to help see if they look similar to the fury ventshades? Thank you, JD

 

[MYSINBIN]

Here you go:

FWIW, the box says 1966-67, 68 4 door sedan, Dodge and Chrysler. Fury is not listed.

Hope the input helps.

John

 

[Jdlov]

Here you go:

View attachment 73341
FWIW, the box says 1966-67, 68 4 door sedan, Dodge and Chrysler. Fury is not listed.
View attachment 73342 View attachment 73343 View attachment 73344 View attachment 73345 View attachment 73346 View attachment 73347 View attachment 73348

Hope the input helps.

John

Outstanding! Thank you so much for the effort. These pics are great!!! JD

 

[Jdlov]

do you have any measurements. I have a set from a 68 Plymouth fury 4 door sedan that I found in a junk yard that don't fit my wagon the rear door on a wagon is wider.

Do your Ventshades look like the photos posted? When you have an opportunity to mess with it, I'd appreciate it if you would have a look. Thank you, JD

 

[Jdlov]

do you have any measurements. I have a set from a 68 Plymouth fury 4 door sedan that I found in a junk yard that don't fit my wagon the rear door on a wagon is wider.

Just a short follow-up. Do your Ventshades look like the photos posted? When you have an opportunity to mess with it, I'd appreciate it if you would have a look. Thank you, JD I appreciate it!

 

[Carmine]

If somebody was really dedicated, I bet they could add/remove/weld the required length from something more common. Grind/sand/polish, done.

As long as you have the front/rear ends, it should just be a matter of length.

 

[crazyboutwagons]

sorry I for got about it. I will dig them out on Thursday and measure and post pics. they are used and not in best of condtion but might cleanup.

 

[garyh]

I need the clips for my Dodge A-100 (same) as C body. Anybody have the clips only???

 

[crazyboutwagons]

here are pics of the ones I have. fronts are 20 5/8" long and the rears are 22 1/4" long came of a 4 dr fury. no hardware the fronts were held in place by a small brass screw( which broke when I removed it)attached to the front vent window frame. the rears were held in place by pressure in the door frame. I did not see any clips if I make it back to junk yard I will look and see if there are any on the car if its still in the yard and hasn't been crushed.

 

[Jdlov]

View attachment 75123 View attachment 75124 View attachment 75125 View attachment 75123 View attachment 75124 View attachment 75125 View attachment 75123 View attachment 75123 View attachment 75123 View attachment 75123 View attachment 75124 View attachment 75124 here are pics of the ones I have. fronts are 20 5/8" long and the rears are 22 1/4" long came of a 4 dr fury. no hardware the fronts were held in place by a small brass screw( which broke when I removed it)attached to the front vent window frame. the rears were held in place by pressure in the door frame. I did not see any clips if I make it back to junk yard I will look and see if there are any on the car if its still in the yard and hasn't been crushed.

No problem at all. I appreciate you even messing around with this for me. Would you be interested in selling these?

 

[Wonderwagon]

If you come up dry thought I saw some on Brads NOS parts ebay store or the yahoo store button

 

[Jdlov]

do you have any measurements. I have a set from a 68 Plymouth fury 4 door sedan that I found in a junk yard that don't fit my wagon the rear door on a wagon is wider.

Would these work for you?

Ventshades C-25, 1965 Plymouth and Dodge Station Wagons, NOS never used, RARE

 

[Jdlov]

Would these work for you?

Ventshades C-25, 1965 Plymouth and Dodge Station Wagons, NOS never used, RARE

Ventshades C-42, 1966-68, Dodge, Plymouth, Chrysler, NOS never used, RARE