carb/timing issue when cold

[jct]

Everything I've done replaced the fuel pump, push rod, accelerator pump spring which helped with the off idle stumble, and adjusted the float which might have cause all this issue was adjusted too low, reason for all the random back firings

Everything is so far so good, won't make a final judgement call until later for more observations

 

[Ripinator]

Everything I've done replaced the fuel pump, push rod, accelerator pump spring which helped with the off idle stumble, and adjusted the float which might have cause all this issue was adjusted too low, reason for all the random back firings

Everything is so far so good, won't make a final judgement call until later for more observations

Dayum! It took you three years to fix this problem?!?

 

[jct]

Heh, other priorities.

 

[jct]

I'm pretty sure it's condenser and points related. I replaced the condenser with a blue streak and have my dwell around 32° I don't even know what the point gap is. Since I set the dwell with my multimeter gauge, no idea what my timing is set at, setup at inch or two below max vacuum, it's purring on the highway without a hickup can't believe all these issues is all due to those two things... Constant fiddly bits