I Know this is a c-body forum, but i happen to be working on my 1969 satellite, and found a connector i cannot identify. The single connector, i believe goes to the light above the ignition key, but the weird 3-prong one has me stumped. Maybe a non-existant buzzer or something?
Connector identification
- Thread starter MEV
- Start date
Easy one.
It's the plug for the delay timer for the ignition light.
It's the plug for the delay timer for the ignition light.
Agreed, the light comes on for a certain amount after the door is opened (dome light triggered). Enough time for the ign cyl illumination to be operative until the key is in the cylinder to start the car. Then the light goes off, automatically.
Thanks gents! I suspected i was looking for something that the precious owner deleted. However, the mystery deepens, i found another connector, that calls into question what i thought i knew. The pink and yellow T-shaped connector looks like it could be a flasher connecror per my wiring diagram, but the diagram shows red/pink, i thought the red/black V-was the flasher connector. I have the emergency flasher wires already located.
After sleeping on it, I was turned around. The "T" connector ties to the door pin wires, so it must be a buzzer of some sort. The Black and red "V" connector is the turn signal flasher. The other pink/whit connector is the hazard flasher.
And as Big_John said above, the odd 3 blade connector was for the key illumination delay timer.
And as Big_John said above, the odd 3 blade connector was for the key illumination delay timer.
Last edited:
Similar threads
