Sorry, this guys garage is a cave. 1974 Dart Swinger two door originally a 225 with three in the tree, with a V8 k member swap already started. Needs lots of work. Only rust I found was one rear fender lip was starting to bubble. Trunk pan and rear rails looked really nice. Missing front seat, there is a bench in the 4 door parts car. The four door comes with the deal. The donor car also had large bolt pattern disc brakes so those spindles are getting swapped over. New bushings and ball joints are already installed in the front end parts.
The dash is torn apart chasing some bad wiring....again, I will need to pull the harness from the parts car. Gonna be a fun project, 360 based 408 stroker. Just have to decide on whether I want a 727 or 4 speed. I spent all day rearranging my shops to try and find room for these cars. I will have better pics later, it's gonna be a while before I have both cars into rollers so I can get them home.
Anyone know what all would have to swapped to get a 4 speed into the car? They make a hump for the floor, but wondering more about bell cranks and linkages.
The dash is torn apart chasing some bad wiring....again, I will need to pull the harness from the parts car. Gonna be a fun project, 360 based 408 stroker. Just have to decide on whether I want a 727 or 4 speed. I spent all day rearranging my shops to try and find room for these cars. I will have better pics later, it's gonna be a while before I have both cars into rollers so I can get them home.
Anyone know what all would have to swapped to get a 4 speed into the car? They make a hump for the floor, but wondering more about bell cranks and linkages.
Last edited:
