Cruise Control Quit Working

[The_Eagles’_Nest]

So as the title says, that’s my problem. The 72 Imperial cruise control quit working. I have a known good switch I swapped out and that did not bring it back. I was trying to test for power going into the servo and can’t seem to find a wire labeled as the power wire going into the switch or the servo. Which wire would it be?

 

[Big_John]

So as the title says, that’s my problem. The 72 Imperial cruise control quit working. I have a known good switch I swapped out and that did not bring it back. I was trying to test for power going into the servo and can’t seem to find a wire labeled as the power wire going into the switch or the servo. Which wire would it be?

Take a look at this. Browse MTSC by Model Year – 1972 – MyMopar Download 72-9 and watch the corresponding video.



There's also this from FCBO A guide to your Speed Control Servo

I attached a PDF of a Mitchell repair guide that may help.

 

[The_Eagles’_Nest]

I’m waking up the Imperial early from her sleep to get this all taken care of.

 

[fullsized]

Did you check the brake light switch? That turns on/off the power.

 

[The_Eagles’_Nest]

Did you check the brake light switch? That turns on/off the power.

Yes that is working fine