WANTED Dash Parts- Hardware needed

[DaPoz]

I am in need of a gland nut and thick washer for either the push button shifter control housing assembly or the blanking plate on the console 300's. I see four are used an all push button Chrysler and Imperials prior to 1964. The picture shows a grommet still on the nut.

I also need the four Phillips head 10/24 machine screws that mount the instrument hood to the bottom of the dash top over the instruments. Not necessarily with the thread cut. These are a different head size than hardware store screws.

Please help, I need these to put my 64 300 K back together!

 

[live4theking]

I could be wrong, but that screw looks a lot like the ones used to hold my 68 dash together. They may be more widely used than you think. The grommet I cannot tell anything from the picture.

 

[DaPoz]

Here is a more clear shot of the gland nut. They seem common prior to 1964. At least to '62.
The head diameter of the screw is .31". Hardware store screws are .37".