SOLD Disc brakes
- Thread starter wagonman
- Start date
- Status
Great price for somebody!!
What year?
Deming New Mexico! Been there twice, both times in August during one of your August monsoons!! Stayed at the Best Western both times!
Huntnm2001
New Member
I live in Las Cruces and am interested in your brake set up.
fury fan
Old Man with a Hat
Is the casting# teh same between 69-72 and the 73-only?
They are the same spindles in fitment with the exception of the machining for the inner bearing and seal, the 73 has a larger journals.
So the machining would change the part#, but not the casting# (if they are indeed the same casting).
I looked at my spare spindles, 1 of 69-72 and 2 of 73, and there is no consistency of numbers, fonts, etc. 2 of my spindles of the opposite hand from yours have numbers cast in.
Best way to ID is to measure the bearing journal and compare vs the ID of the 2 inner bearings that were used in this era.
They are the same spindles in fitment with the exception of the machining for the inner bearing and seal, the 73 has a larger journals.
So the machining would change the part#, but not the casting# (if they are indeed the same casting).
I looked at my spare spindles, 1 of 69-72 and 2 of 73, and there is no consistency of numbers, fonts, etc. 2 of my spindles of the opposite hand from yours have numbers cast in.
Best way to ID is to measure the bearing journal and compare vs the ID of the 2 inner bearings that were used in this era.
Huntnm2001
New Member
Thanks George, pleasure doing business with you
- Status
Similar threads
- Locked
